您好,欢迎您查看分析测试百科网,请问有什么帮助您的?

稍后再说 立即咨询
咨询列表
北京伯英科技有限公司
X
头像

客服中心

如果企业客服不在线,也可拨打400电话联系。或者发布求购信息

400-6699-1171000
发布求购 实验百科采购-随时微信沟通
扫码关注
实验采购百科

北京伯英科技有限公司

400-6699-117转1000
热门搜索:
分析测试百科网 > 伯英 > LB膜分析仪 > 伯英科技小型LB膜分析仪

伯英科技小型LB膜分析仪

非会员

诚信认证:

工商注册信息已核实!

扫一扫即可访问手机版展台
参考报价: 面议 型号: LB
品牌: 伯英 产地: 北京
关注度: 19 信息完整度:
样本: 典型用户: 暂无
供应商性质生产商产地类别国产
咨询留言 在线咨询

400-6699-1171000

小型LB膜分析仪

   上一个: 卷对卷式柔性LB膜分析仪

   下一个:    实验室数据备份与恢复系统

小型LB膜分析仪




除了卷对卷式柔性LB膜分析仪,我们还有传统的小型LB膜分析仪,可实现LB膜的分析与沉积。LB膜槽子面积小,样品少,基片小,采用垂直镀膜方法。

型号为LT-111,Minitrough 小型LB膜分析仪

性价比高,仅需1.5万欧元(不同配置略有增减)。



卷对卷式柔性LB膜分析仪仪器是一种多功能的LB莫分析仪,具有柔性镀膜,刚性镀膜,垂直镀膜,水平镀膜功能。

卷对卷式柔性LB膜分析仪仪器用于在较长的柔性基底(如保鲜膜式柔性带状基底)上连续沉积单分子薄膜,也可把大尺寸刚性衬底粘接在皮带上进行镀膜,可进行无限多次LB薄膜沉积,可控制柔性基底顺时针或逆时针旋转,沉积X,Y,Z多种类型的LB薄膜结构。同时具备垂直镀膜与水平镀膜功能。衬底可以是卷式铝箔、卷式PET塑料薄膜等。设备包含镀膜槽,卷对卷样品传动装置,卷对卷转动滑障与水平移动滑障,表面压探头与镀膜头,自动进样装置:注射泵与蠕动泵,控制器,电脑。
     卷对卷式柔性LB膜分析仪液体界面单分子薄膜镀膜仪器可进行无限多次薄膜沉积,可控制柔性基底顺时针或逆时针旋转,沉积x、y、z型结构的薄膜。


小型LB膜分析仪技术指标:


滑障控制有效面积范围:128+2 cm2-440+1 cm2

基底尺寸范围:125х125x4 mm (h-w-t)

镀膜井尺寸:200x180x200 mm (w-d-h)

表面压传感器:灵敏度0.01 mN/m,测量范围0-80 mN/m。


小型LB膜分析仪Langmuir–Blodgett trough ‘LT-111’ is intended

  • for application of monomolecular films on solid samples according to the Langmuir–Blodgett (LB) technique and for deposition of multimolecular films by corresponding layer-by-layer technique;

  • for measurement of compression isotherms (without limitation in number of surfactants in multicomponent mixtures);

  • for application of monomolecular films on solid samples according to the horizontal precipitation (HP) technique;

  • for experiments on construction mono- and mulimolecular composite coatings on solid surface;

  • for altering the surface properties (hydrophylic, optical, electrical etc. behavior);

  • for fundamental research at production of ultrathin films and their application as insulating and protective coatings, elements of molecular electronics, in biological studies for creation of analogs for bilayer lipid membranes etc..

This version features extra-wide dipping well suitable for flat samples of diameter up to 125 mm. That allows experimentation with, for example, silicon wafers directly.


FEATURES


小型LB膜分析仪技术参数:

Number of barriers:

One

Velocity range of the barrier motion:

54–210 mm/min (single side comression)

Full free surface area:

463+1 cm2

Maximum free surface area confined with the barrier:

440+1 cm2

Minimum free surface area confined with the barrier:

128+2 cm2

Compressed (effective) area:

312 cm2

Liquid medium volume:

1000-1030 cm3

Dipping well:

depth 110 mm, widht 130 mm

Maximum dimensions of the immersed substrate:

125х125x4 mm (h-w-t)

Delay between the layers deposition:

0–100000 s

Dipper mechanism stroke:

85 mm (vertical position of the unit can be adjusted manually)

Dipper mechanism velocity range:

0.12–70 mm/min, step of the velocity change 0.1 mm/min

Deposition rate:

0.002 to 2 mm/min

Surface tension sensor:

Wilhelmy plate 2 cm2, accuracy ~0.1 mN/m (vertical position   of the sensor can be adjusted manually)

Number of surafce tension sensors:

One

Sensitivity of the surface tension sensor:

0.05 mN/m

Working range of the surface tension sensor:

0-80 mN/m (stepped and fine adjustment of the range are available)

Overall dimensions:

Trough with mounted rig - 400x200x250 mm (w-d-h); Control unit -   220x165x105 mm (w-d-h); Weight 7/8 kg.

Supply voltage:

220 V 50 Hz

Power consumption:

not more than 40 W

Additional accessories:

  • Substrate clamping holder for fixing the sample        on the dipper lever.

  • Rig for film application by the horizontal        precipitation method (by liquid medium draining).

  • Base slab suitable for liquid thermostating by        outer source (not included).



TECHNIQUES

卷对卷式LB膜分析仪技术:

 Deposition of X-type LB film

 Deposition of Y-type LB film

Deposition of Z-type LB film

Horizontal   precipitation (HP) method (by liquid medium draining) provides surface   modification by extremely uniform and homogenous monolayer films (see, for   examplethis paper). HP method allows transferring of monolayer films at various surfaces simultaneously from huge variety of surfactants (both in solid and liquid state) despite of polar head structure. The process of deposition is simple   and fast. In particular, the surface of metallized silicon wafer can be   modified by HP method within 3-5 minutes.

Roll-To-Roll deposition technique engages   additional accessories in the set of LB trough LT-310 to deposit   monomolecular film on tape (continuous deposition on flexible substrate). In   LT-310, extraction angle of the exiting portion of tape may be adjusted in   range 30-90owith step 5o




伯英科技小型LB膜分析仪信息由北京伯英科技有限公司为您提供,如您想了解更多关于伯英科技小型LB膜分析仪报价、型号、参数等信息,欢迎来电或留言咨询。

注:该产品未在中华人民共和国食品药品监督管理部门申请医疗器械注册和备案,不可用于临床诊断或治疗等相关用途

伯英科技小型LB膜分析仪 - 产品推荐

移动版: 资讯 直播 仪器谱

Copyright ©2007-2023 ANTPEDIA, All Rights Reserved

京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号