Dynamic Testing Machine

Dynamic Testing Machine HT-9711 
Dynamic Testing Machine  
Data Acquisition System Block Diagram

Control Utility 
   
 
 
Specifications 
Model HT
9711-10 HT
9711-25 HT
9711-50 HT
9711-100 HT
9711-200 HT
9711-300 HT
9711-500 
• Power source Electro-Hydraulic Servo Control System 
• Force capacity kg 1000 2000 5000 10000 20000 30000 50000 
kN 10 20 50 100 200 300 500 
• Max. Stroke (mm) Dynamic ±25 
Static ±50 
• Control mode Force, displacement control 
• Static force sensor capacity x120%, x100%, x50%, 20%, 10% (auto gain selection) 
• Static force sensing error less than or equal to ±1% (Calibration error) 
• Dynamic force sensor capacity x100%, x50%, 20%, 10% 
• Dynamic force sensing error less than or equal to ±1% (Calibration error) 
• style E type E type E type E type D type D type D type 
• Operating width 620 620 760 760 750 750 750 
• Operating height 250~1000 250~1100 
• Dimensions (WxDxH) mm 1270x600x2400 1325x750x2650 
• Hydraulic power QR-10 QR-20 QR-10 QR-20 QR-40 QR-60 QR-80 
• Flow rate (L/min) 10 10 10 20 40 60 80 
• Servo valve rated flow rate (L/min) 15 15 15 30 45 80 120 
• Accumulator capacity (pressure/return end) (L) 1L/1L (optional) 5L/5L (optional) 
• Displacement sensor LVDT built in actuator 
• Waveform           
(Ramp) (Sine) (Triangular) (Square)        
dimension, table, stroke, and capacity can be made to order depending on customer requirements 

 
Servo Hydraulic System Specifications 
1. One servo-actuator 
2. 500~50,000 kg force (used defined) 
3. One hydraulic power package 
• Main pump: 40~120 l/min, 200kg per cubic cm (can be set up to 310 kg per cubic cm) 
• Motor: 3phase, 220VAC, 40~80HP 
• Tank: 400 L capacity 
• Oil Filter: 5 micron 
• Accumulator: Pressure end 1 qt., return end 1 qt. (option) 
• Cooling system: 1set 
• Pressure switch: 1set 
• Crosshead adjustment power package, provides power to tune crosshead 
position and lock 
4. Servo valve: 40~180 L/min rated flow rate, bandwidth greater than or equal to 50Hz, resolution less than or equal to 0.5% 
5. Fatigue type load cell: 500~50,000 kg., 0.05%FS nonlinearity, calibration error is less than or equal to 1% 
6. DC type LVDT: Built in actuator, 50~300mm stroke, 0.05% nonlinearity 

 
Controller and Control Interface Specifications 
1. Control one servo-actuator 
2. Closed loop force and position learning control 
3. Loading and shaking the test article 
4. Servo amplifier 
5. DC transducer conditioner 
6. A/D channel; 16bit resolution, 1/2LSB nonlinearity 
7. D/A channel; 16bit resolution, 1/2LSB nonlinearity 
8. D/O channel; process control, crosshead position adjustment 
• Computer: 1set 
• CPU: Pentium MMx200 or greater 
• RAM: 32MB 
• 15" super VGA monitor, 1024x768 
• Hard Drive: 2.1GB or greater 
• Printer: Inkjet 
• 1.44 floppy drive 
• Rack: 1set 
 
Servo Hydraulic System Specifications 
1. Operating system: Microsoft Windows 95 
2. Set-up test sequence database management 
3. Fixture constant load and minor adjustment 
4. Auto-generation sine, triangular, ramp, and square wave 
5. Closed-loop learning controller, force and position control 
6. Real time data display 
7. Test data auto storage 
8. Three types of graph zoom 
9. Provides force-time, disp.-time, force-disp. diagram 
10. Present tabular and graphical reports 
11. Report editor 
12. Auto stop 
13. Control safety diagnostics 
14. Diagram auto scale and user defined 
 
  
 

Hungta Co.Ltd. Copyright ©2005 All rights reserved. Privacy Policy | Terms of Use | Site Requirements

 

Dynamic Testing Machine HT-9711
Dynamic Testing Machine
Data Acquisition System Block Diagram

Control Utility



Specifications
Model HT
9711-10 HT
9711-25 HT
9711-50 HT
9711-100 HT
9711-200 HT
9711-300 HT
9711-500
• Power source Electro-Hydraulic Servo Control System
• Force capacity kg 1000 2000 5000 10000 20000 30000 50000
kN 10 20 50 100 200 300 500
• Max. Stroke (mm) Dynamic ±25
Static ±50
• Control mode Force, displacement control
• Static force sensor capacity x120%, x100%, x50%, 20%, 10% (auto gain selection)
• Static force sensing error less than or equal to ±1% (Calibration error)
• Dynamic force sensor capacity x100%, x50%, 20%, 10%
• Dynamic force sensing error less than or equal to ±1% (Calibration error)
• style E type E type E type E type D type D type D type
• Operating width 620 620 760 760 750 750 750
• Operating height 250~1000 250~1100
• Dimensions (WxDxH) mm 1270x600x2400 1325x750x2650
• Hydraulic power QR-10 QR-20 QR-10 QR-20 QR-40 QR-60 QR-80
• Flow rate (L/min) 10 10 10 20 40 60 80
• Servo valve rated flow rate (L/min) 15 15 15 30 45 80 120
• Accumulator capacity (pressure/return end) (L) 1L/1L (optional) 5L/5L (optional)
• Displacement sensor LVDT built in actuator
• Waveform
(Ramp) (Sine) (Triangular) (Square)
dimension, table, stroke, and capacity can be made to order depending on customer requirements


Servo Hydraulic System Specifications
1. One servo-actuator
2. 500~50,000 kg force (used defined)
3. One hydraulic power package
• Main pump: 40~120 l/min, 200kg per cubic cm (can be set up to 310 kg per cubic cm)
• Motor: 3phase, 220VAC, 40~80HP
• Tank: 400 L capacity
• Oil Filter: 5 micron
• Accumulator: Pressure end 1 qt., return end 1 qt. (option)
• Cooling system: 1set
• Pressure switch: 1set
• Crosshead adjustment power package, provides power to tune crosshead
position and lock
4. Servo valve: 40~180 L/min rated flow rate, bandwidth greater than or equal to 50Hz, resolution less than or equal to 0.5%
5. Fatigue type load cell: 500~50,000 kg., 0.05%FS nonlinearity, calibration error is less than or equal to 1%
6. DC type LVDT: Built in actuator, 50~300mm stroke, 0.05% nonlinearity


Controller and Control Interface Specifications
1. Control one servo-actuator
2. Closed loop force and position learning control
3. Loading and shaking the test article
4. Servo amplifier
5. DC transducer conditioner
6. A/D channel; 16bit resolution, 1/2LSB nonlinearity
7. D/A channel; 16bit resolution, 1/2LSB nonlinearity
8. D/O channel; process control, crosshead position adjustment
• Computer: 1set
• CPU: Pentium MMx200 or greater
• RAM: 32MB
• 15" super VGA monitor, 1024x768
• Hard Drive: 2.1GB or greater
• Printer: Inkjet
• 1.44 floppy drive
• Rack: 1set

Servo Hydraulic System Specifications
1. Operating system: Microsoft Windows 95
2. Set-up test sequence database management
3. Fixture constant load and minor adjustment
4. Auto-generation sine, triangular, ramp, and square wave
5. Closed-loop learning controller, force and position control
6. Real time data display
7. Test data auto storage
8. Three types of graph zoom
9. Provides force-time, disp.-time, force-disp. diagram
10. Present tabular and graphical reports
11. Report editor
12. Auto stop
13. Control safety diagnostics
14. Diagram auto scale and user defined




Hungta Co.Ltd. Copyright ©2005 All rights reserved. Privacy Policy | Terms of Use | Site Requirements

Dynamic Testing Machine HT-9711
Dynamic Testing Machine
Data Acquisition System Block Diagram

Control Utility



Specifications
Model HT
9711-10 HT
9711-25 HT
9711-50 HT
9711-100 HT
9711-200 HT
9711-300 HT
9711-500
• Power source Electro-Hydraulic Servo Control System
• Force capacity kg 1000 2000 5000 10000 20000 30000 50000
kN 10 20 50 100 200 300 500
• Max. Stroke (mm) Dynamic ±25
Static ±50
• Control mode Force, displacement control
• Static force sensor capacity x120%, x100%, x50%, 20%, 10% (auto gain selection)
• Static force sensing error less than or equal to ±1% (Calibration error)
• Dynamic force sensor capacity x100%, x50%, 20%, 10%
• Dynamic force sensing error less than or equal to ±1% (Calibration error)
• style E type E type E type E type D type D type D type
• Operating width 620 620 760 760 750 750 750
• Operating height 250~1000 250~1100
• Dimensions (WxDxH) mm 1270x600x2400 1325x750x2650
• Hydraulic power QR-10 QR-20 QR-10 QR-20 QR-40 QR-60 QR-80
• Flow rate (L/min) 10 10 10 20 40 60 80
• Servo valve rated flow rate (L/min) 15 15 15 30 45 80 120
• Accumulator capacity (pressure/return end) (L) 1L/1L (optional) 5L/5L (optional)
• Displacement sensor LVDT built in actuator
• Waveform
(Ramp) (Sine) (Triangular) (Square)
dimension, table, stroke, and capacity can be made to order depending on customer requirements


Servo Hydraulic System Specifications
1. One servo-actuator
2. 500~50,000 kg force (used defined)
3. One hydraulic power package
• Main pump: 40~120 l/min, 200kg per cubic cm (can be set up to 310 kg per cubic cm)
• Motor: 3phase, 220VAC, 40~80HP
• Tank: 400 L capacity
• Oil Filter: 5 micron
• Accumulator: Pressure end 1 qt., return end 1 qt. (option)
• Cooling system: 1set
• Pressure switch: 1set
• Crosshead adjustment power package, provides power to tune crosshead
position and lock
4. Servo valve: 40~180 L/min rated flow rate, bandwidth greater than or equal to 50Hz, resolution less than or equal to 0.5%
5. Fatigue type load cell: 500~50,000 kg., 0.05%FS nonlinearity, calibration error is less than or equal to 1%
6. DC type LVDT: Built in actuator, 50~300mm stroke, 0.05% nonlinearity


Controller and Control Interface Specifications
1. Control one servo-actuator
2. Closed loop force and position learning control
3. Loading and shaking the test article
4. Servo amplifier
5. DC transducer conditioner
6. A/D channel; 16bit resolution, 1/2LSB nonlinearity
7. D/A channel; 16bit resolution, 1/2LSB nonlinearity
8. D/O channel; process control, crosshead position adjustment
• Computer: 1set
• CPU: Pentium MMx200 or greater
• RAM: 32MB
• 15" super VGA monitor, 1024x768
• Hard Drive: 2.1GB or greater
• Printer: Inkjet
• 1.44 floppy drive
• Rack: 1set

Servo Hydraulic System Specifications
1. Operating system: Microsoft Windows 95
2. Set-up test sequence database management
3. Fixture constant load and minor adjustment
4. Auto-generation sine, triangular, ramp, and square wave
5. Closed-loop learning controller, force and position control
6. Real time data display
7. Test data auto storage
8. Three types of graph zoom
9. Provides force-time, disp.-time, force-disp. diagram
10. Present tabular and graphical reports
11. Report editor
12. Auto stop
13. Control safety diagnostics
14. Diagram auto scale and user defined




Hungta Co.Ltd. Copyright ©2005 All rights reserved. Privacy Policy | Terms of Use | Site Requirements

Dynamic Testing Machine信息由台湾弘达（试验机）集团股份有限公司为您提供，如您想了解更多关于Dynamic Testing Machine报价、型号、参数等信息，欢迎来电或留言咨询。

注：该产品未在中华人民共和国食品药品监督管理部门申请医疗器械注册和备案，不可用于临床诊断或治疗等相关用途