默克密理博Lynx系列一次性无菌连接器

tel: 400-6699-117 转 1000

Milli-Q无菌试验隔离, 默克密理博独特设计的Lynx S2S (无菌连接)连接器是单次安装、单次使用，伽玛辐照灭菌与高压灭菌兼容的一次性使用的连......

参数指标

Length	Typical Flow Rate
0.64 cm (0.25 in.)	9.5 L/min @ 1.38 bar (20 psid) @ 25 °C (bi-directional)
0.95 cm (0.375 in.)	27.3 L/min @ 1.38 bar (20 psid) @ 25 °C (bi-directional)
1.27 cm (0.5 in.)	71.9 L/min @ 1.38 bar (20 psid) @ 25 °C (bi-directional)
Maximum Differential Pressure, bar (psig) (actuated)	4.1 bar (60 psid) @ 25 °C (bi-directional)
Materials of Construction
Connector	Polysulfone, USP Class VI, 21 CFR
Gasket	Silicone, USP Class VI, 21 CFR
Operating Temperature Range	4 to 40 °C
Fittings - Inlet/Outlet Couplings
1/4 in Hose Barb to fit 0.19 in (4.8 mm) ID
3/8 in Hose Barb to fit 0.25 in (7.1 mm) ID
1/2 in Hose Barb to fit 0.43 in (10.9 mm) ID
Sterilization	Gamma compatible up to 45 kGy; Autoclave once for 30 minutes @ 130 °C. Do not steam in place.
Dimensions
Male Coupling, mm	Female Coupling, mm
0	145.5
50	47
122	70
Toxicity
Classification of Plastics	Meets USP Class VI Biological Test for Plastics In-vivo <88> (wetted surfaces only)
Endotoxin	(LAL) pre- and post-gamma irradiation: ≤ 0.25 EU/mL
Particle Releasing	This product has been tested per USP <788> to ensure particulates >10 μm are <20/mL and particulates >25 μm are <2/mL.
Non-Fiber Releasing	Component materials meet the “non-fiber releasing“ criteria as defined in 21 CFR 210.3 (b) (6).
Indirect Food Additive	All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.