德国Pharma-test 四合一片剂测试仪PTB420

tel: 400-6699-117 转 3163

Pharma-test片剂硬度仪, Pharma-test PTB 420四合一自动药片测试仪是双测试模式仪器，用于确定片剂的直径，厚度和硬度。该仪器严格遵......

在线客服

参数指标

我要提交参数指标我要纠错

● 检测参数：厚度，直径（长度），硬度和质量
● 测量模式：恒力法和恒速法
● 硬度测量范围：2-300N（5-500N可选）
● 可选硬度单位：N, Kp，Sc
● 厚度测量范围：2-12mm
● 直径测量范围：2-30mm
● 片重：可连接Mettler或Sartorius分析天平，分辨率0.1mg
● 接口：RS 232、USB、LAN接口
● 全身不锈钢机身
● 标配IQ和OQ文档

Hardness Testing Range	2.0 – 300.0N (optional 5.0 – 500.0N and 10 – 1000N)
Hardness Accuracy	Better than 1N
Thickness Testing Range	2.00 – 12.00mm
Thickness Accuracy	Better than ±0.05mm
Diameter Testing Range	2.00 – 30.00mm without magazine
Possible Sample Size (When Using a Magazine)	length max. 25mm, width/diameter max. 20mm
Diameter Accuracy	Better than ±0.05mm
Weight Measurement	by using a connected, external Mettler-Toledo or Sartorius balance (balance not included in standard supply scope), the individual or average weight can be recognized and automatically transferred to the PTB420.
Weight Testing Range	0.0001g – 99.9999g
Measuring Units	Thickness and diameter selectable between millimeter [mm] (factory setting) and inches [In] Hardness selectable between Newton [N] (factory setting), Kilopond [kp] and Strong Cobb [Sc]
Force Mode	Selectable between linear force increase and constant speed
Force Rate: lin. force	5 – 200 N/sec.
Force Rate: constant speed	5 – 250 mm/Min.
Display	Back-lit color LCD
Keyboard	Alpha-numeric keypad and click wheel
User Settings User / Passwords Methods Procedures Products	Memory for user defined settings: up to 50 up to 200 up to 100 up to 100
Feeder	Tablet magazine for 10 samples available (optional)
Laser Type	Class 1
Interface	RS232 serial port to connect a Mettler-Toledo or Sartorius balance Parallel port for printer connection RS232 port for PC connection USB port for firmware updates All interface ports match the SELV- (save extra low voltage) codes. All additional instruments (printer, balance…) plugged to the PTB 420 must also match the SELV-codes.
Instrument Housing	Stainless steel (304) to meet GLP requirements
Power	110/230 Volt AC, 50/60 Hz
Current Consumption	0,25A at 230V; 0,5A at 115V; 60W
Main Fuse	2 x T2,0A
Grade of Pollution	2
Operational Altitude	0 – 2000 m; 0 – 6500 ft
Installation Requirements	» Ambient Temperature 10-40°C » Relative Humidity 20-90%rH » Desk with at least 50 kg working load. All around the instrument at least 10cm free distance to walls or other equipment. Free access to the mains power plug and switch. No special ventilation necessary.
Use of Corrosive Materials	0,1 NHCL approved, no other solvents permitted, see cleaning instructions. Possible residues must be removed immediately (see “Cleaning Instructions”)
Instrument Dimensions	approx. 400 x 530 x 400 mm (Length x Width x Height)
Packaging Dimensions	approx. 500 x 590 x 440 mm (Length x Width x Height)
Net / Gross Weight	approx. 20 kg / 30 kg (without optional asseccories)
Certification	All components certified to USP / EP requirements
CE / EMC Certification	All CE / EMC Certification provided
Validation	All IQ & OQ documents included