Avesta 钛宝石飞秒激光器 TiF-50

tel: 400-6699-117 转 1000

阿维斯塔激光器, 可调飞秒脉冲输出/连续输出可切换......

在线客服

参数指标

我要提交参数指标我要纠错

Standard models and available pump laser power
	TiF-50ST (standard wavelength range)	TiF-50LW (extended IR range)
Pump laser power	Wavelength tuning	Output power	Wavelength tuning	Output power
3 W	740-860 nm	>300 mW аt 800 nm	n/a	n/a
4 W	740-870 nm	>450 mW аt 800 nm	n/a	n/a
5 W	735-875 nm	>600 mW аt 800 nm	830-950 nm	>150 mW at 950 nm
6 W	725-880 nm	>800 mW аt 800 nm	830-960 nm	>150 mW at 960 nm
8 W	730-885 nm	>1 W аt 800 nm	830-970 nm	>150 mW at 970 nm
It is possible to combine both ranges in a single laser system, please enquire for details.

General optical specifications
Output pulse duration¹⁾	<50 fs
Spectrum width¹⁾ (FWHM)	>17 nm
Pulse repetition rate (fixed)	80±10 MHz
Pump laser	integrated or stand-alone DPSS 532 nm low-noise laser (up to 8 W)
Beam mode	TEMoo (M^2 <1.2)
Beam diameter (at 1/e^2)	<2 mm
Output polarization	linear, horizontal, PER >20 dB
Beam divergence	<1 mrad
Long-term stability²⁾	<0.1% rms
Noise³⁾	<0.2% rms
Physical dimensions (L × W × H)
Laser head dimensions	516 × 350 × 118 mm (including integrated pump laser)
Pump laser control unit dimensions	353 × 360 × 119 mm
Closed-loop chiller dimensions	430 × 340 × 190 mm
Environmental and utility specifications
Operating temperature	15-30 °C
Relative humidity	<60%, non-condensing
Voltage	single-phase; 100-240 VAC; 50/60 Hz
Power consumption	<2 kW
Available configuration packages⁴⁾
Thermally stabilized monolithic body	included in any package
Pulse train SMA output with mode-lock LED	included in any package
“Auto” factory package	- built-in spectrometer - single-touch wavelength tuning w. presets - built-in power meter - active output power stability locking - Windows software with configurable widgets - automatic mode-lock start and monitoring PC requirements: USB 2.0 port, Windows 10
“Basic“ factory package (default)	- push-button starter - USB 2.0 wavelength tuning via step-motor slit (via step number information and calibration) PC requirements: USB 2.0 port, Windows 10
“Manual” factory package	- push-button starter - manual wavelength tuning slit
1) - when tuned to 800 nm central wavelength; 2) - after 30 min warm-up with cold start, during 12-hour continuous operation under equal room temperature conditions using recommended stabilized closed-loop chiller with proper capacity and recommended low-noise on-board integrated highly stable pump laser with active power locking; 3) - measured from 10 Hz to 10 MHz; 4) - please select one of the packages for your system; certain features may be tailored or combined differently according to specific customer requirements.