Selectra Pro XL大型全自动生化分析仪

Throughput

• Up to 450 photometric and electrolyte tests/hour.

Reagent System

• 64 refrigerated reagent positions for 10 mL, 25 mL and 50 mL reagent bottles

• Cooled to 10°C +/- 4°C at normal laboratory conditions

• All reagent positions can be assigned as R1, R2 and R3.

Sample System

• 80 barcode readable positions

• All positions fit 13×75 or 16x 100mm primary and secondary tubes and pediatric cups

• All positions can be used for calibrators, controls, normal, pediatric and STAT samples

Pipetting System

• 1000 µL reagent syringe:

• R1 volume 110-400 µL

• R2 volume 0-180 µL

• R3 volume 0-180 µL

• Programmable in 1 µL steps

• 100 µL sample syringe:

• Sample volume 1-30 µL

• Programmable in 0.1 µL steps

• Pre programmed ratio selectable from ratios 1:2 up to 1:100 with 3 diluents

• Pre-heated probe with level detection, collision protection and integrated mixer.

Cuvette Rotor

• Cost effective, semi-disposable cuvette rotor with 48 cuvettes

• Up to 10.000 tests per rotor

• Typical reagent consumption 220 µL per test

• Measurement temperature 37°C, controlled by Peltier elements.

Light Source

• Quartz-iodine lamp 12V-20W

Wavelength Range

• Optical unit with 8 position filter wheel

• 340, 405, 505, 546, 578, 620, 660, 700 nm standard wavelengths

• Other wavelengths available on request.

Photometric Range

• -0.1 to 3.0 Absorbance

• Resolution 0.001 Abs.

Analytical Modes (Single, Dual and Triple reagent system)

• Kinetic measurement with linearity check

• Mono- and bichromatic end point measurement with or without bichromatic reagent blank and/or sample blank correction

• Two point measurement; with or without slope blank

• Graphic plot of all measuring points

• Predilution and automatic reflex dilution as needed

• Range of calibration models

• Non-linear calibration curves

• Prozone check for immunology tests

• Cut-off declaration

• Calculated tests.

Quality Control

• Up to 15 controls can be defined, 3 per test

• Westgard or Basic QC rules

• Levey-Jennings plots

• Quality control statistics.

Standards and Regulations 

• CE -IVD

• CB

• UL.

Dimensions 

• 117 x 115 x 80 cm (W x H x D)

• 46.1 x 45.3 x 31.5 in(W x H x D)

• Weight: 190 kg (419 lbs).

Interface

• Host-Query interface available

• Host: RS 232 or Ethernet (TCP/IP) through LIS-2A protocol.

Environmental Conditions

• Temperature: 15 – 32 °C (59 – 90 °F)

• Humidity: 15 – 88% RH

• Altitude: up to 2000 m

• Plumbing: No dedicated water or drain required

• Electrical:

• Voltage: 100 – 240 Vac

• Frequency: 50 – 60 Hz

• Power (max): 380 VA .

Integrated PC

• Touch screen navigation

• Operating system: Windows™ XP

Options

Barcode Reader

• Hand held CCD barcode reader used for reagent identification

Eco Kit

• Enables separate collection of concentrated measurement mixture and dilute (wash) waste

Dry ISE Module

• Patented Solid State Electrode Technology

• Indirect measurement

• Dilution 1:14

• Measures Sodium, Potassium, Chloride and CO2.

Positive Sample Identification

• Positive Sample Identification (PSID) reads all popular barcodes.

Printer

• Printer supported by MS Windows™.

ProActive Maintenance Kit

• Complete parts kit for annual preventive maintenance.