Antibody Purification
This protocol includes an ammonium sulfate cut, affigel blue chromatography and affinity chromatography.
1. Solutions
(1) Affigel Blue Prewash
0.1 M acetic acid 5.7 ml glacial acetic acid
1.4 M NaCl 81 g NaCl
40% isopropanol 400 ml isopropanol
up to 1 liter with Q
check to make sure pH is 3.0
(2) Affigel Blue Running Buffer
10 mM K2HPO4 2.28 g K2HPO4
0.15 M NaCl 8.2 g NaCl
0.02% azide 0.2 g Na azide
up to 1 liter with Q
(3) 1.4 M NaCl
8.1 g NaCl
up to 100 ml with Q
(4) Saturated NH4SO4
767 g NH4SO4
add 1 liter Q
(5) 10X PBS
80 g NaCl
2 g KCl
14.4 g Na2HPO4
2.4 g KH2PO4
up to 1 liter with Q
(6) Affigel Blue Regeneration Buffer
2 M guanidine HCl or 1.5 M Na thiocyanate
(7) HiTrap Storage Buffer
10 mM Tris 7.5 1 ml 1M Tris 7.5
0.1 mM EDTA 20 ul 500 mM EDTA
50 mM NaCl 1 ml 5M NaCl
0.1% azide 0.1 g Na azide
up to 100 ml with Q
(8) 1X Coupling Buffer
0.2 M NaHCO3 1.68 g NaHCO3
0.5 M NaCl 2.92 g NaCl
pH to 8.0 and bring up to 100 ml
(9) 1X Buffer A
0.5 M NaCl 2.92 g NaCl
0.01 M Tris 0.121 g Tris base
pH to 8.3 and bring up to 100 ml
Add 3.0 ml ethanolamine before use
(10) 1X Buffer A
0.1 M NaOAc 0.82 g NaOAc
0.5 M NaCl 2.92 g NaCl
pH to 4.0 and bring up to 100 ml
2. Procedure
(1) Pour a 5 ml affigel blue column (biorad) and wash with 50 ml Prewash to prep the column (when first used or if last used in more than a week).
(2) Wash with 50 ml Q, followed by 50 ml Running Buffer.
(3) Wash with 50 ml 1.4 M NaCl, if eluate is colored, then re-equilibrate.
(4) Wash with 50 ml Running Buffer.
(5) Load 1 ml serum, save flow-through, elute with 2 bed volumes running buffer (the serum albumin should stick to the column and the Ig should flow through).
(6) On ice slowly add saturated ammonium sulfate to 45% (550 ml sample 450 ml saturated ammonium sulfate). Tilt overnight at 4°C.
(7) Pellet by spinning at 3,000 rpm for 10 minutes at 4°C.
(8) Resuspend the pellet in 1 ml 1X PBS on ice (don’t vortex or agitate) and dialyze against PBS.
(9) The pharmacia HiTrap 1ml column can bind 10 micromoles of peptide or protein per ml of bed volume. Prep the HiTrap column by washing with 10 ml 50% Isopropanol, 25% Isopropanol, 10% Isopropanol, and 10 ml 1 mM ice cold HCl.
(10) Resuspend the peptide or protein in 1 ml 1X Coupling Buffer and load the column. Hold at room temperature for 1 hour.
(11) Wash with 5 ml 1X Coupling Buffer and save the flowthrough.
(12) Wash with 6 ml Buffer A, 6 ml Buffer B, and 6 ml Buffer A. Hold at room temperature for 30 minutes.
(13) Wash with 6 ml Buffer B, 6 ml Buffer A, and 6 ml Buffer B. Wash with Storage Buffer and hold at 4°C.
(14) To purify the antibody, load the affigel concentrate onto the column and hold at room temperature for 10 minutes.
(15) Wash with 50 ml 10 mM Tris 7.5 and then wash with 50 ml 10 mM Tris 7.5/500 mM NaCl. Elute with 5 ml 100 mM Glycine pH 2.5 into 1 ml 1M Tris 8.0.
(16) Dialyze and concentrate with a centricon 30.
-
焦点事件
-
焦点事件
-
会议会展
