NEMA C119.5-2018
电连接器 绝缘穿刺连接器系统 额定电压为 600 伏或更低(低压架空捆绑电缆和绝缘和非绝缘电线)

Electric Connectors - Insulation Piercing Connector Systems@ Rated 600 Volts or Less (Low - Voltage Aerial Bundled Cables and Insulated and Non-Insulated Line Wires)


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 NEMA C119.5-2018 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
NEMA C119.5-2018
发布
2018年
发布单位
NEMA - National Electrical Manufacturers Association
当前最新
NEMA C119.5-2018
 
 
适用范围
This Standard covers insulation piercing connectors used for making electrical connections between insulated@ insulated-to-bare@ and bare-to-bare conductors rated 600 V or less and 90??(low-voltage aerial bundled cables and bare and insulated line wires) on overhead distribution lines for electric utilities. Underground insulation piercing connector systems rated at 600 V are covered by ANSI C119.1. Since cable and insulation types exist in very different types and configurations@ insulation piercing connectors cannot be designed for the full range of cable and insulation possibilities (cable cross-section and material@ insulation material and thickness). The manufacturer is to indicate the cable and insulation types the connector is designed for@ and conformity to this Standard shall be established by testing with these cable and insulation types. This Standard establishes the electrical@ mechanical@ and environmental test requirements for electrical insulation piercing connectors. This Standard is not intended to recommend operating conditions or temperatures. Purpose The purpose of this Standard is to give reasonable assurance to the user that connectors meeting the requirements of this Standard will perform in a satisfactory manner@ provided they have been properly selected for the intended application and are installed in accordance with the manufacturer's recommendations. The service operating conditions and the selection of the connector class is the responsibility of the user.

NEMA C119.5-2018相似标准


推荐

九个问题看清铝合金电缆

由于无法解决配套铝合金连接器等问题,所以不宜制造用于布电线领域电线。  四、铝合金电缆的制造及应用相关标准  1 、电缆制造标准  在北美等国家,铝合金电缆的制造主要依据美标ASTM B 800 05 (2011)、801 07(R2012)进行生产检验。在国内,目前铝合金电缆专门的国家行业制造标准《额定电压0.6/1kV铝合金导体交联聚乙烯绝缘电力电缆》待颁布中。...

环保:用电汇总,常见错误

2、施工现场配电线路(1)必须采用绝缘导线;(2)导线截面应满足计算负荷要求和末端电压偏移 5%的要求;(3)电缆配线应采用有专用保护线的电缆;(4)架空线路的导线截面一般场所不得小于100m㎡(钢线)16 m㎡(铝线),跨越公路、河道和在电力线路挡距内不得小于16 m㎡(钢线)25 m㎡铝线;(5)配电线路至配电装置的电源进线必须做固定连接,严禁做活动连接;(6)配电线路的绝缘阴值不得小于1000ΩW...

扩散 | IEC 206个国内技术对口单位联系信息全部公开

电缆电线、波导、射频连接器、射频微波无源元件附件中国电子科技集团公司第二十三研究所戴唯一021-33792731std@stl.com.cn71SC46A同轴电缆中国电子科技集团公司第二十三研究所戴唯一021-33792731std@stl.com.cn72SC46C电线对称电缆上海电缆研究所有限公司陈佶民021-65494605-2021chjiminjk@163.com73SC46F射频微波无源元件中国电子技术标准化研究院吴正平...

市场监管总局抽查77种产品,部分企业连续两次国抽不合格

重点对要求,电气连续性极性,防触电保护,温升,弯曲试验,滚筒试验,耐热,绝缘材料的耐非正常热、耐燃痕化,插入拔出连接器所需的力,分断容量,机械强度,耐热和抗老化性能,爬距离、电气间隙穿通绝缘距离,绝缘材料的耐热、耐燃痕化,绝缘老化前抗张强度,绝缘老化前断裂伸长率,绝缘老化后抗张强度,绝缘老化前后抗张强度变化率,绝缘老化后断裂伸长率,绝缘老化前后断裂伸长率变化率,绝缘热延伸试验,绝缘失重试验...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号