FprEN 50716:2023

Railway Applications - Requirements for software development


FprEN 50716:2023 发布历史

1.1 This European Standard specifies the process and technical requirements for the development of software for programmable electronic systems for use in control, command for signaling applications and any on-board of rolling stock. This European Standard is not intended to be applied in the area of electric traction power supply (fixed installation) or for power supply and control of conventional applications, e.g. station power supply for offices, shops etc. These applications are covered typically by standards for energy distribution and/or non-railway sectors and/or local legal frameworks. For railway related fixed installations (electric traction power control and supply) the EN 50562 is applicable. 1.2 This European Standard is applicable exclusively to software and the interaction between software and the system of which it is part. 1.3 Intentionally left blank 1.4 This European Standard applies to all software used in railway systems, including - application programming, - operating systems, - support tools, - firmware. Application programming comprises high level programming, low level programming and special purpose programming (for example: Programmable logic controller ladder logic). 1.5 This European Standard also addresses the use of pre-existing software and tools. Such software may be used, if the specific requirements in 7.3.4.7 and 6.5.4.16 on pre-existing software and for tools in 6.7 are fulfilled. 1.6 Software developed according to any version of EN 50128 or EN 50657 will be considered as compliant and not subject to the requirements on pre-existing software. 1.7 This European Standard considers that modern application design often makes use of software that is suitable as a basis for various applications. Such software is then configured by application data for producing the executable software for the application. 1.8 Entry intentionally left empty. 1.9 This European Standard is not intended to be retrospective. It therefore applies primarily to new developments and only applies in its entirety to existing systems if these are subjected to major modifications. For minor changes, only 9.2 applies. The assessor has to analyse the evidences provided in the software documentation to confirm whether the determination of the nature and scope of software changes is adequate. However, application of this European Standard during upgrades and maintenance of existing software is highly recommended. 1.10 For the development of User Programmable Integrated Circuits (e.g. FPGA & CPLD) guidance is provided in EN 50129:2018 Annex F for safety related functions and in EN 50155:2017 for non-safety related functions. Software running on soft-cores of User Programmable Integrated Circuits is within the scope of this European Standard. [...]

FprEN 50716:2023由欧洲电工标准化委员会 IX-CENELEC 发布于 -,并于 - 实施,于 - 废止。

FprEN 50716:2023在国际标准分类中归属于: 35.240.60 信息技术在运输和贸易中的应用。

FprEN 50716:2023的历代版本如下:

 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 FprEN 50716:2023 前三页,或者稍后再访问。

点击下载后,生成下载文件时间比较长,请耐心等待......

 



标准号
FprEN 50716:2023
发布
1970年
发布单位
欧洲电工标准化委员会
 
 
适用范围
1.1 This European Standard specifies the process and technical requirements for the development of software for programmable electronic systems for use in control, command for signaling applications and any on-board of rolling stock. This European Standard is not intended to be applied in the area of electric traction power supply (fixed installation) or for power supply and control of conventional applications, e.g. station power supply for offices, shops etc. These applications are covered typically by standards for energy distribution and/or non-railway sectors and/or local legal frameworks. For railway related fixed installations (electric traction power control and supply) the EN 50562 is applicable. 1.2 This European Standard is applicable exclusively to software and the interaction between software and the system of which it is part. 1.3 Intentionally left blank 1.4 This European Standard applies to all software used in railway systems, including - application programming, - operating systems, - support tools, - firmware. Application programming comprises high level programming, low level programming and special purpose programming (for example: Programmable logic controller ladder logic). 1.5 This European Standard also addresses the use of pre-existing software and tools. Such software may be used, if the specific requirements in 7.3.4.7 and 6.5.4.16 on pre-existing software and for tools in 6.7 are fulfilled. 1.6 Software developed according to any version of EN 50128 or EN 50657 will be considered as compliant and not subject to the requirements on pre-existing software. 1.7 This European Standard considers that modern application design often makes use of software that is suitable as a basis for various applications. Such software is then configured by application data for producing the executable software for the application. 1.8 Entry intentionally left empty. 1.9 This European Standard is not intended to be retrospective. It therefore applies primarily to new developments and only applies in its entirety to existing systems if these are subjected to major modifications. For minor changes, only 9.2 applies. The assessor has to analyse the evidences provided in the software documentation to confirm whether the determination of the nature and scope of software changes is adequate. However, application of this European Standard during upgrades and maintenance of existing software is highly recommended. 1.10 For the development of User Programmable Integrated Circuits (e.g. FPGA & CPLD) guidance is provided in EN 50129:2018 Annex F for safety related functions and in EN 50155:2017 for non-safety related functions. Software running on soft-cores of User Programmable Integrated Circuits is within the scope of this European Standard. [...]

FprEN 50716:2023相似标准





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号