ISO 6714:1990
色漆和清漆.干漆膜酸萃取物的制备

Paints and varnishes — Preparation of acid extracts from dried paint films


标准号
ISO 6714:1990
发布
1990年
发布单位
国际标准化组织
当前最新
ISO 6714:1990
 
 
适用范围
This International Standard specifies methods for the preparation of acid extracts required as the test solutions for the determination of the “soluble” metal contents of dried paint films. The acid extracts are prepared in 0,07 mol/l hydrochloric acid sol- ution, which is chosen as an approximation of the strength of the acids in the stomach. The methods allow test solutions to be prepared from test portions weighing between 25 mg and 250 mg. In certain situations, either it may not be possible to obtain a 25 mg test portion, or larger test portions may be needed and, in both circumstances, appropriate modification of the method will be nec- essary. This International Standard is for use in conjunction with the appropriate parts of ISO 3856. The acid ex- tract prepared in accordance with ISO 6714 may be used for the determination of the individual metal contents.

推荐

解析TCJ-II漆膜弹性冲击器工作原理

  TCJ-II漆膜弹性冲击器是根据ASTMD2794、ISO6272标准要求设计制造。主要用于测定彩色钢板及其它漆膜耐冲击性能。测试在标准条件下,色清漆或相关产品膜经受重锤冲击而发生变性时,其抗开裂或从底材剥离性能。测试方法有通过/不通过试验分级试验两种。   ...

检测汽车涂料中重金属元素样品前处理方法

制备样品】在样品进行前处理实验之前,需要对待测汽车涂料样品进行涂膜制备,过程如下:将待测汽车涂料样品(清漆或色)按照涂料样品明示施工配比制备混合试样,搅拌均匀后,在玻璃板上制备厚度适宜漆膜,在涂料样品规定干燥条件下,待漆膜完全干燥,取下漆膜,在室温下用粉碎设备将其粉碎,漆膜尺寸小于5mm。进行样品前处理实验。【实验方法】1....

ZHY涂层自动划痕测试仪OM--8660A简介

自动划痕仪是本公司根据CB9279-88《色清漆划痕试验》ISO 12137-2:1997《色清漆耐划伤性测定》中有关规定而精心设计制造。本测试仪是用来测定色清漆单一涂层或复合涂层体系或水性木漆在标准条件下耐划透耐划伤性。本仪器采用大速比大输出扭矩齿轮减速箱,以保证在不同测试负载下划针移动速度恒定,使测试结果具有较高精度。本仪器目前可以做是两种底材试验。...

划痕试验仪操作

划痕试验仪是本公司根据GB9279《色清漆划痕试验》ISO12137-2《色清漆耐划伤性测定》中有关规定而精心设计制造。本测试仪是用来测定色清漆单一涂层或复合涂层体系或水性木漆在标准条件下耐划透耐划伤性。本仪器采用大速比大输出扭矩齿轮减速箱,以保证在不同测试负载下划针移动速度恒定,使测试结果具有较高精度。本仪器目前可以做是两种底材试验。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号