EN ISO 10893-10:2011
更改超声波检测频率;更改验收标准

Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011)

2020-10

 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 EN ISO 10893-10:2011 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
EN ISO 10893-10:2011
发布
2011年
发布单位
欧洲标准化委员会
替代标准
EN ISO 10893-10:2011/A1:2020
当前最新
EN ISO 10893-10:2011/A1:2020
 
 
适用范围
ISO 10893-10:2011 specifies requirements for automated full peripheral ultrasonic shear wave (generated by conventional or phased array technique) testing of seamless and welded [except submerged arc-welded (SAW)] steel tubes, for the detection of longitudinal and/or transverse imperfections. In the case of testing on longitudinal imperfections, Lamb wave testing can be applied at the discretion of the manufacturer. For seamless tubes, by agreement between the purchaser and manufacturer, testing principles of ISO 10893-10:2011 can be applied to detect imperfections having other orientations. ISO 10893-10:2011 is applicable to the inspection of tubes with an outside diameter greater than or equal to 10 mm, normally with an outside diameter-to-thickness ratio greater than or equal to 5. It can also be applicable to the testing of circular hollow sections.

EN ISO 10893-10:2011相似标准


推荐

6处变化|工业放射防护标准解读

修订的主要内容如下:(1)更改了探伤机放射防护性能的要求;(2)增加了“使用单位放射防护要求”;(3)更改了控制区距离的估算;(4)将放射防护要求场所相关的空气比释动能率更改为周围剂量当量率;(5)删除γ探伤机性能验收检测内容;(6)删除管道爬行探伤装置、γ探伤机快门形式的示意图。...

《工业探伤放射防护标准》2023年3月1日起实施

(见附录 A,GBZ 132—2008 的附录 C);  d) 将放射防护要求场所相关的空气比释动能率更改为周围剂量当量率(见表 1、表 2、6.1.3、6.1.4、  7.2.2、7.2.8、7.5.2.4、8.4.2,GBZ 117—2015 的表 1,GBZ132—2008 的表 1、6.1、7.3.1、  7.3.6、7.5.5、8.2.2 c));  e) 删除了γ探伤机性能验收检测的内容...

富士浓度计测量精度影响因素和浓度计工艺参数

鉴于上述情况,将超声波传感器测量频率从原来的1 MHz变更为500 kHz; 传感器收发间距从原来的100 ~293 mm 更改为25 ~ 80 mm; 传感器探头材质在不锈钢表面再加耐磨涂层,以防其磨损过。...

实验室记录的编制与设计

2)机(检测所需的抽样、测量和检测设备及标准物质):供应商评价记录、合格供应商名录,仪器设备档案中包括仪器设备购置审批、验收记录、使用授权,使用和维护记录、检定/校准证书验收表、期间核查记录、故障及修理、报废审批、调拨审批记录,租用、借用或使用客户仪器设备评价记录及合同,校正因子使用记录。标准物质档案中包括标准物质清单、验收及评价记录、期间核查记录、领用记录,标准溶液的制备与标定原始记录等。...


谁引用了EN ISO 10893-10:2011 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号