PREN 13155-2017
起重机 安全 非固定负载起重附件

Crane - Safety - Non-fixed load lifting attachments


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 PREN 13155-2017 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
PREN 13155-2017
发布
2017年
发布单位
CEN - European Committee for Standardization
当前最新
PREN 13155-2017
 
 
适用范围
This European Standard specifies safety requirements for the following non-fixed load lifting attachments for cranes@ hoists and manually controlled load manipulating devices: a) plate clamps; b) vacuum lifters; 1) self-priming; 2) non-self-priming (pump@ venturi@ turbine); c) electric lifting magnets (battery fed and mains-fed); d) permanent lifting magnets; e) electro-permanent lifting magnets; f) lifting beams; g) C-hooks; h) lifting forks; i) clamps; and j) lifting insert systems for use in normal weight concrete@ as defined in Clause 3. This standard does not give requirements for: ?? non-fixed load lifting attachments in direct contact with foodstuffs or pharmaceuticals requiring a high level of cleanliness for hygiene reasons; ?? hazards resulting from handling specific hazardous materials (e.g. explosives@ hot molten masses@ radiating materials); ?? hazards caused by operation in an explosive atmosphere; ?? hazards caused by noise; ?? hazards relating to the lifting of persons; ?? electrical hazards; and ?? hazards due to hydraulic and pneumatic components. For high risk applications not covered by this standard@ EN 13001-2:2014@ 4.3.2 gives guidance to deal with them. This standard covers the proof of static strength@ the elastic stability and the proof of fatigue strength. For attachments designed for less than 16 000 lifting cycles@ the proof of fatigue strength is covered by the proof of static strength (elastic and yielded conditions@ see 5.1.2.1). NOTE This standard does not generally cover attachments intended to lift above people. Some attachments are suitable for that purpose if equipped with additional safety features. In such cases the additional safety features are specified in the specific requirements. This standard does not cover slings@ ladles@ expanding mandrels@ buckets@ grabs@ or grab buckets. This standard is not applicable to non-fixed load lifting attachments for crane@ hoists and manually controlled load manipulating devices which are manufactured before the date this publication as EN.

PREN 13155-2017相似标准


推荐

市场监管总局 | 《特种设备检验检测人员资格认定项目》发布

起重机械制造(含安装、修理、改造)1.桥式、门式起重机(A)2.流动式起重机(A)3.门座式起重机(A)1.桥式、门式起重机(B)2.流动式起重机(B)3.门座式起重机(B)4.机械式停车设备5.塔式起重机、升降机6.缆索式起重机7.桅杆式起重机许可参数级别见注五。...

市场监管总局2021年第41号公告

充装单位许可移动式压力容器、气瓶充装无全部附件2特种设备作业人员资格认定分类与项目 序 号种 类作业项目项目代号1特种设备安全管理特种设备安全管理A2锅炉作业工业锅炉司炉G1电站锅炉司炉(注1)G2锅炉水处理G33压力容器作业快开门式压力容器操作R1移动式压力容器充装R2氧舱维护保养R34气瓶作业气瓶充装P5电梯作业电梯修理(注2)T6起重机作业起重机指挥Q1起重机司机(注3)Q27客运索道作业客运索道修理...

起重机改造及检验的项目要求答疑

第十九条 在使用登记地使用的起重机械,检验结论为不合格或者复检不合格的,检验机构应当将检验意见书(2)及时报该起重机械的使用登记机关。   在使用登记地使用的起重机械,检验机构应当将检验报告报该起重机械的使用登记机关备案;检验结论为不合格或者复检不合格的,检验机构还应当将检验意见书(2)及时报使用所在地的特种设备安全监督管理部门。   ...

市场监管总局关于特种设备行政许可有关事项的公告

境外特种设备制造 境外承压类特种设备实施制造许可制度:1.锅炉2.压力容器3.气瓶4.安全附件安全阀、爆破片装置、紧急切断阀、燃气气瓶阀门)5.压力管道元件(压力管道管子、压力管道阀门)无1.境外承压类特种设备制造许可参数级别、型式试验要求与境内相同。2.进口境外机电类特种设备(电梯、起重机械、客运索道、大型游乐设施、场(厂)内专用机动车辆)及其部件,在投入使用前应通过型式试验。...


PREN 13155-2017 中可能用到的仪器设备





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号