EN 13487:2019
热交换器.强制对流空气冷却制冷剂凝结器和干式冷却机.声音测量

Heat exchanger - Forced convection air cooled refrigerant condensers and dry coolers - Sound measurement

2020-02

 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 EN 13487:2019 前三页,或者稍后再访问。

如果您需要购买此标准的全文,请联系:

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
EN 13487:2019
发布
2019年
发布单位
欧洲标准化委员会
当前最新
EN 13487:2019
 
 
适用范围
1.1 General This document is one of a series dedicated to air-cooled heat exchangers. - forced convection air cooled refrigerant condensers as specified in EN 327; - forced convection unit air coolers for refrigeration as specified in EN 328; - air cooled liquid coolers "dry coolers" as specified in EN 1048. This document provides information for assessing and presenting the acoustic emission characteristics of heat exchangers under stationary operating conditions. This document is applicable to selfstanding forced convection air cooled refrigerant condensers and air cooled liquid coolers "dry coolers" and air coolers. 1.2 Size of source The method specified in EN ISO 3744, EN ISO 3745, EN ISO 3746, EN ISO 9614 1, EN ISO 9614 2 and EN ISO 9614-3 is applicable to noise sources of any size. Limitations for the size of the source are given in 1.3 of EN ISO 3741:2010, EN ISO 3743 1:2010 and EN ISO 3743 2:2009. 1.3 Object This document offers ways to determine the sound power level of units. Some of them are specifically adapted to provide results with low uncertainties, by using laboratory class or engineering class acoustic methods under highly controlled working conditions. Those results are suitable for certification, labeling and marking purposes. This document is concerned with objective methods for determining sound power levels LW, expressed in decibels (dB) with reference to a sound power of one picowatt (1 pW), of airborne acoustical noise within the specified frequency range of interest and for prescribed operating conditions of the appliance to be measured: - A-weighted sound power level, LWA; - spectral sound power levels; - emission sound pressure level at workplace, LpA.

EN 13487:2019相似标准


推荐

SMC干燥器结构

压缩制冷剂压缩以升高压力,经冷凝器冷却,使制冷剂由气态变成液态。液态制冷剂在毛细管中膨胀气化。气化后的制冷剂进入热交换器的内筒,对热空气进行冷却,然后再回到压缩中进行循环压缩。所使用制冷剂为氟利昂R134aR22.容量控制阀是用来调节空气冷却器温度的,以适应处理空气量的变化或改变压力露点。蒸发温度计显示压缩空气的露点温度。...

SMC冷冻干燥器IDFIDU介绍

压缩制冷剂压缩以升高压力,经冷凝器冷却,使制冷剂由气态变成液态。液态制冷剂在毛细管中膨胀气化。气化后的制冷剂进入热交换器的内筒,对热空气进行冷却,然后再回到压缩中进行循环压缩。所使用制冷剂为氟利昂R134aR22.容量控制阀是用来调节空气冷却器温度的,以适应处理空气量的变化或改变压力露点。蒸发温度计显示压缩空气的露点温度。...

高低温冲击试验箱解决方案

1、空气循环装置:内置空调间、循环风道及长轴离心通风机,使用的制冷能量调节系统,通过通风机进行有效的交换,达到温度变化之目的。通过改善空气的气流,提高了空气流量及与加热器空气表冷器的热交换能力,从而大幅改善了试验箱的温度均匀度。2、加热方式:镍铬合金丝电加热器;3、空气冷却方式:多级膜片式空气热交换器...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号