EN 61290-4-3:2015
光放大器 测试方法 第 4-3 部分:功率瞬态参数 输出功率控制中的单通道光放大器

Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 EN 61290-4-3:2015 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
EN 61290-4-3:2015
发布
2015年
发布单位
CENELEC - European Committee for Electrotechnical Standardization
当前最新
EN 61290-4-3:2015
 
 
适用范围
This part of IEC 61290 applies to output power controlled optically amplified@ elementary subsystems. It applies to optical fibre amplifiers (OFA) using active fibres containing rare-earth dopants@ presently commercially available@ as indicated in IEC 61291-1@ as well as alternative optical amplifiers that can be used for single channel output power controlled operation@ such as semiconductor optical amplifiers (SOA). The object of this standard is to provide the general background for optical amplifier (OA) power transients and its measurements and to indicate those IEC standard test methods for accurate and reliable measurements of the following transient parameters: a) Transient power response b) Transient power overcompensation response c) Steady-state power offset d) Transient power response time The stimulus and responses behaviours under consideration include: Channel power increase 1) (step transient) 2) Channel power reduction (inverse step transient) 3) Channel power increase eduction (pulse transient) 4) Channel power reduction/increase (inverse pulse transient) 5) Channel power increase eduction/increase (lightning bolt transient) 6) Channel power reduction/increase eduction (inverse lightning bolt transient) These parameters have been included to provide a complete description of the transient behaviour of an output power transient controlled OA. The test definition defined here are applicable if the amplifier is an OFA or an alternative OA. However@ the description in Annex A of this document concentrates on the physical performance of an OFA and provides a detailed description of the behaviour of OFA; it does not give a similar description of other OA types.

EN 61290-4-3:2015相似标准


推荐

中国太赫兹技术研究有望领先全球

为了获得更高输出功率, 可以采用电真空器件, 如加拿大CPI 公司研制速调管(Klystron) 在W 波段上获得了超过2000 W 脉冲输出功率, 北京真空电子研究所研制行波管(TWT) 放大器在W 波段脉冲输出功率超过了100 W,电子科技大学在W 波段上也成功设计了TWT 功率放大器, 中国科学院合肥物质科学研究院研制迴旋管(Gyrotron) 在140 GHz 上获得了0.9 MW...

【防务资讯】“DARPA2016年展示日”10大前沿主题——频谱篇

目前,已经制造和测试了可运行在670GHz和850GHz微机械行波管放大器,刷新这些频点上最高线性输出功率。THz Electronics项目的成功将通过实现相干太赫兹处理技术带来颠覆性应用,如太赫兹成像系统,亚毫米波、超宽带、超高容量通信链路、用于爆炸物探测光谱亚毫米波、单芯片宽带调谐频率合成器。...

毫米波与太赫兹技术(二)

为了获得更高输出功率,可以采用电真空器件,如加拿大CPI 公司研制速调管(Klystron) 在W 波段上获得了超过2000 W 脉冲输出功率,北京真空电子研究所研制行波管(TWT) 放大器在W 波段脉冲输出功率超过了100 W,电子科技大学在W 波段上也成功设计了TWT 功率放大器,中国科学院合肥物质科学研究院研制迴旋管(Gyrotron) 在140 GHz 上获得了0.9...

【远望周刊】3期:机载激光武器系统——颠覆未来作战模式空中利剑(附下载)

诺格公司和达信公司开展3阶段研究工作主要目标是使高能固体激光器功率达到100千瓦量级,同时减小体积和重量,开发出可用作机载小型战术激光武器高能固体激光器。2009年2月,诺格公司为JHPSSL项目3阶段研制高能固体激光器输出功率达到105kW。...


谁引用了EN 61290-4-3:2015 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号