CSA/ANSI NGV 1-2017由SCC 发布于 2017-03-01。
。
CSA/ANSI NGV 1-2017 压缩天然气汽车 (NGV) 加油连接装置的最新版本是哪一版?
最新版本是 CSA/ANSI NGV 1-2017 。
CSA/ANSI NGV 1-2017 由 CSA NGV1-2006 压缩天然气汽车 (NGV) 加油连接装置 变更而来。
1.1 This Standard applies to newly produced compressed Natural Gas Vehicle (NGV) fueling connection devices, hereinafter referred to as “devices”, constructed entirely of new, unused parts and materials. NGV fueling connection devices consist of the following components, as applicable: a) receptacle and protective cap (mounted on vehicle) (see Clause 4.4); b) nozzle (see Clause 4.2); and c) three-way valve (external to nozzle and mounted in the fuel dispenser system) (see Clause 4.5). 1.2 This Standard applies to devices that have a service pressure of either 8300 kPa (1200 psi), 16 500 kPa (2400 psi), 20 700 kPa (3000 psi), or 24 800 kPa (3600 psi), hereinafter referred to in this Standard as the following (see Clause 4.8.3 c)): “P12” - 8300 kPa (1200 psi) “P24” - 16 500 kPa (2400 psi) “P30” and “P30HD” - 20 700 kPa (3000 psi) “P36” and “P36HD” - 24 800 kPa (3600 psi) The “HD” suffix designates a larger geometry version to allow higher flow rates associated with fueling larger heavy duty applications. 1.3 This Standard applies to devices with standardized mating components (see Clauses 4.4.6 and 4.6). 1.4 This Standard applies to devices that: a) prevent natural gas vehicles from being fueled by a dispenser with service pressures higher than the vehicle it was designed for; b) allow natural gas vehicles to be fueled by a dispenser with service pressures equal to or lower than the vehicle fuel system service pressure; and c) prevent light duty natural gas vehicles from being fueled by a heavy duty dispenser. 1.5 This Standard does not apply to repaired or rebuilt nozzles. 1.6 All references to “psi or kPa” throughout this Standard are to be considered gauge pressures unless otherwise specified. 1.7 Units of measure This Standard contains SI (metric) units with corresponding yard/pound quantities, the purpose being to allow the Standard to be used in yard/pound units. IEEE/ASTM SI 10, American National Standard for Metric Practice, or ISO 80000-1:2009 Quantities and units - Part 1: General, is used as a guide in making conversion.) If a value for a measurement and a corresponding value in other units are stated, the first stated value is to be regarded as the requirement. The given corresponding value may be approximate. If a value for a measurement and a corresponding value in other units, are both specified as a quoted marking requirement, the first stated unit, or both are to be provided. 1.8 Terminology In this Standard, “shall” is used to express a requirement, i.e., a provision that the user shall satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
CSA位于克利夫兰的先进设施占地128,000平方英尺,提供的全面测试服务可以帮助制造商为氢动力车和氢加油站生产出可靠、安全的替代能源产品和组件,而这两者在帮助解决对高能效产品和替代能源设备不断增长的需求方面极为重要。 CSA在认证替代能源汽车组件方面拥有丰富的经验。除了测试氢动力组件,CSA还于近期升级了位于克利夫兰的压缩天然气测试实验室,以满足不断增加的市场需求。...
出租车、公交车必须到定点改装企业进行CNG汽车改装,车辆完成改装后,其CNG 气瓶须经取得相应核准的检验机构安装监督检验合格,并到设区市质监部门申领电子标签;CNG汽车的专用装置应当由原生产企业或已取得许可的CNG汽车专用装置定点维修企业进行维护和维修。 因CNG汽车报废、车载CNG气瓶拆除或报废,造成车辆不再使用CNG的,车主(或车辆所属运营企业)应按程序办理相关手续。...
2015年底,ISOTC197年会在美国洛杉矶的丰田北美销售中心召开,期间笔者有幸参观了壳牌石油公司在NewPort的一处加油加氢站,该加油加氢采取的就是站内制氢模式,由站内的天然气制氢装置作为氢源。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号