IEC 61290-3-2:2008
Optical amplifiers – Test methods – Part 3-2: Noise figure parameters – Electrical spectrum analyzer method (Edition 2.0)

Amplificateurs optiques – Méthodes d’essais - Partie 3-2: Paramètres du facteur de bruit – Méthode de l’analyseur spectral électrique (Edition 2.0)

标准号

IEC 61290-3-2:2008

发布

2008年

发布单位

IEC - International Electrotechnical Commission

当前最新

IEC 61290-3-2:2008

 

 

引用标准

IEC 60728-6 IEC 61290-3 IEC 61291-1

被代替标准

IEC 86C/784/CDV:2007 IEC 61290-3-2:2003

适用范围

This part of IEC 61290 applies to all commercially available optical amplifiers (OAs), including OAs using optically pumped fibres (OFAs based on either rare-earth doped fibres or on the Raman effect), semiconductor optical amplifiers (SOAs) and planar waveguide optical amplifiers (PWOAs). The object of this standard is to establish uniform requirements for accurate and reliable measurements, by means of the electrical spectrum analyzer (ESA) method, of the noise figure, as defined in IEC 61291-1. The present test method is based on direct electrical noise measurement and it is directly related to its definition including all relevant noise contributions. Therefore, this method can be used for all types of optical amplifiers, including SOA and Raman amplifiers which can have significant contributions besides amplified spontaneous emission, because it measures the total noise figure. For further details of applicability, see IEC 61290-3. An alternative test method based on the optical spectrum analyzer can be used, particularly for different noise parameters (such as the signal-spontaneous noise factor) but it is not included in the object of this standard. NOTE 1 All numerical values followed by (:1:) are suggested values for which the measurement is assured. Other values may be acceptable but should be verified. NOTE 2 A measurement accuracy for the average noise factor of _+20 %(:1:), respectively +1 dB, should be attainable with this method (see Clause 6). NOTE 3 General aspects of noise figure test methods are reported in IEC 61290-3.

IEC 61290-3-2:2008相似标准

推荐

谁引用了IEC 61290-3-2:2008 更多引用