ITU-T Y.1566-2012
以太网 互联网协议和多协议标签交换网络之间的服务质量映射和互连(第 12 研究组)

Quality of service mapping and interconnection between Ethernet@ Internet protocol and multiprotocol label switching networks (Study Group 12)


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 ITU-T Y.1566-2012 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
ITU-T Y.1566-2012
发布
2012年
发布单位
ITU-T - International Telecommunication Union/ITU Telcommunication Sector
 
 
适用范围
This Recommendation defines a limited set of classes that provide a basis for interworking between the different traffic class aggregates of different service providers@ while preserving the original intent of the service (although packet markings might change). The scope includes interworking between layers and between networks using similar technologies. Each QoS class is defined by its qualitative performance characteristics and the suggested groups of applications whose performance requirements match the characteristics of one or more classes. The limit on the number of classes is imposed by the space available in the widely-used three-bit codepoint space. End-to-end QoS requires a common understanding of the QoS class properties in all involved domains. While many similarities are expected between the deployed or planned QoS architectures of different providers@ these are often not obvious when starting interconnection negotiations. This specification aims on enabling end-to-end QoS (by preserving the intended service properties) across different packet networks and on simplification of the technical QoS interconnection negotiations between providers. Informational examples in the appendices provide: ? Codepoint to class association@ with an interworking example ? ITU-T Y.1541 QoS class mapping to interworking classes The allocation of numerical performance budgets among interworking networks in the user network interface to user network interface (UNI-UNI) path is out of the scope of this Recommendation. The issue of matching [b-3GPP TS 23.203] standardized QoS class identifier (QCI) characteristics to interworking classes is for further study.

ITU-T Y.1566-2012相似标准


推荐

IPv6、4G捭阖纵横:我们如何建造新一代互联网

再造新一代互联网变革之一:实现从IPv4到IPv6升级   互联网编号分配机构(IANA)创始人Jon Postel早在1981年Internet Society(ISOC)互联网工作编制Request For Comments(RFC)791文件中即对IP进行了定义:“互联网协议(IP)特指为实现在一个相互连网络系统上从一个源到一个目的地传输比特数据包(互联网数据包)所提供必要功能协议...

《国家智能制造标准体系建设指南》(全文)

5.工业互联网标准工业互联网以泛在互联、低成本计算、安全可信、可互操作工业信息基础设施为着眼点,构建贯穿工厂内全层级、工厂外全价值链高可靠、高带宽、高连接数、低时延工厂内网络工厂外网络,实现产品全生命周期信息追踪管理,满足工厂内部智能化、网络化以及与外部交换需求。工业互联网标准主要包括体系架构、网联技术、资源配置、网络设备等四个部分,如图12所示。...

九大最流行现场总线“叱咤”工控领域

工厂自动化信息网络可分为以下三层结构:工厂管理级、车间监控级、现场设备级,而现场总线是工厂底层设备之间通信网络。这里先介绍一下以太网,本文特指工业以太网,工业以太网是作为办公室自动化领域衍生工业网络协议,按习惯主要指IEEE802.3协议,如果进一步采用TCP/IP协议族,则采用“以太网+TCP/IP”来表示,其技术特点主要适合信息管理、信息处理系统,并在IT业得到了巨大成功。...

天地一体化天基骨干网络体系架构研究

图8 基于GEO高轨卫星天基骨干网络协议原型示意图1)在骨干网络上采用WDM波分复用技术,基于激光波长交换完成骨干网传输节点分发;2)在每个激光通信电路上,采用SDH技术,承载基于MPLSIP汇聚数据或CCSDS子带数据;3)在每个激光通信电路上,采用SDH技术,承载基于CCSDS电路交换数据;4)在协议原型中,IP分组交换与MPLS协议标签交换之间接口是空间微波接口,MPLS协议标签交换...


谁引用了ITU-T Y.1566-2012 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号