GSO IEC GUIDE 111:2015
高压变电站高压电气设备 产品标准规格的一般建议

Electrical high-voltage equipment in high-voltage substations - Common recommendations for product standards


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 GSO IEC GUIDE 111:2015 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
GSO IEC GUIDE 111:2015
发布
2015年
发布单位
GSO
当前最新
GSO IEC GUIDE 111:2015
 
 
适用范围
IEC Guide 111 is a horizontal publication which gives guidance for the harmonization of product and system standards within substations where the highest voltage for equipment is higher than 1 kV. It primarily addresses conventional a.c. equipment which is found in highvoltage (HV) substations in most cases. This Guide contains recommendations for common specifications for all HV substation product standards, each of which is augmented by the technical background specific to each TC, which naturally retains freedom in its technical choices. Where HV power electronic equipment is part of an HV substation, for example, HVDC or SVC,economics and technology dictate a deviation from common clauses as standardized for a.c. equipment. However, when developing product standards for HV power electronic equipment for use in HV substations, the common recommendations of this Guide should be adopted as far as possible. Clearly, any specification in this guide which is inapplicable to a certain type of product,because of that product's inherent characteristics, for example, should not be taken into account when writing standards for that type of product.

GSO IEC GUIDE 111:2015相似标准


推荐

充气式试验变压器容量范围

充气式试验变压器技术参数:充气式试验变压器规格型号         >电压等级:10——600KV >容量范围:1——600KVA >空载电流:<7% >阻抗电压:<8% >额定电压局放量:<5PC  简介 试验高压器是根据机电部《试验变压器》标准在原同类产品基础上经过大量改进后而生产,交直流高压试验变压器是在YD系列试验变压器基础上按照国家标准《JB∕T 9641-1999》经过改进后而生产一种新型产品...

交直流高压试验变压器技术指标介绍

6、使用本产品高压试验时,除熟悉本说明书外,还必须严格执行国家有关标准和操作规程。可参照GB311—83《电气设备预防性试验规程》等。    泄漏试验    1、被试品做试验前,应拆除所有对外连线,并充分放电,主要部位应清除干净,保持干燥,以免损坏被试品及带来试验数值误差。   ...

电压电气试验对设备造价影响

电压电气设备既是电力系统中重要电力设备,同时也是一种产品,也需要面对降低成本以获得大利润和控制造价与市场同类型产品竞争压力。成本控制定义成本控制,就是依据一定时期建立成本管理目标,在控制主体责权范围之内,于生产耗费发生之前和企业成本形成过程之中,为提高成本效益而对各种影响因素所采取主动预防和及时调节措施。一般包括以下程序:(1)根据定额制定成本标准,并据此制定各项降低成本技术措施。...

红外热成像仪在设备选购方面注意问题

  设备维护  A电气设备  ●高温量程一般到200℃即可。  ●考虑到有部分设备可能在室外工作,低温量程一般要求到达-20℃。  ●对于一般电气设备或部件,热像仪像素在160×120,并选用标准镜头。  ●对于远距离、小目标测量(如输电线路线夹等),建议选用320×240像素或640×480像素及更高像素,并选配长焦镜头。  ...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号