This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of PVC-U moulding and extrusion materials. Requirements for handling test materials and for conditioning both the test material before moulding and the specimens before testing are given. The properties required for the designation of PVC-U thermoplastics are given in ISO 21306-1. All properties are intended to be determined by the appropriate methods referred to in this document and values obtained shall be presented as laid down in ISO 10350-1. The values determined in accordance with this document are not necessarily be identical to those obtained using specimens of different dimensions and/or prepared by different procedures. The values obtained for the properties of a moulding depend on the moulding compound, the shape, the test method and the state of anisotropy. The last-mentioned depends on the gating of the mould and the moulding conditions, for example temperature, pressure and injection rate. Any subsequent treatment is also be considered, for example conditioning or annealing. The thermal history and the internal stresses of the specimens can strongly influence the thermal and mechanical properties and the resistance to environmental stress cracking, but exert less effect on the electrical properties, which depend mainly on the chemical composition of the moulding compound. In order to obtain reproducible and comparable test results, the methods of preparation and conditioning, the specimen dimensions and the test procedures specified herein are used. Values determined are not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.
EN ISO 21306-2:2019由欧洲标准化委员会 IX-CEN 发布于 2019-04-10,并于 2019-07-31 实施,于 2019-10-31 废止。
EN ISO 21306-2:2019在国际标准分类中归属于: 83.080.20 热塑性塑料。
非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 EN ISO 21306-2:2019 前三页,或者稍后再访问。
点击下载后,生成下载文件时间比较长,请耐心等待......
-1981塑料 导电塑料电阻率的测量28ISO 527-3 Technical Corrigendum 1-1998塑料 拉伸性能的测定 第3部分:薄膜和薄板材的试验条件技术勘误129ISO/TR 4137-1978塑料 交替弯曲的弹性模量的测定30ISO 1872-2-2007塑料.聚乙烯(PE)模塑和挤塑材料.第2部分:试样制备和性能测定31ISO 4574-1978塑料 通用聚氯乙烯(...
21306-2:2019塑料-未塑化聚乙烯(PVC-U)模塑和挤出材料-第2部分:试样制备和性能测定Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号