GSO ASTM D1091:2015
润滑油和添加剂中磷含量的测定

Standard Test Methods for Phosphorus in Lubricating Oils and Additives


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 GSO ASTM D1091:2015 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
GSO ASTM D1091:2015
发布
2015年
发布单位
GSO
当前最新
GSO ASTM D1091:2015
 
 
适用范围
1.1 These test methods cover the determination of phosphorus in unused lubricating oils and lubricating oil additives and their concentrates. The test methods are not restricted with respect to the type of phosphorus compounds that may be presentfor example, trivalent or pentavalent phosphorus compounds, phosphines, phosphates, phosphonates, phosphorus sulfides, and so forthsince all are quantitatively converted to an aqueous solution of orthophosphate ion by oxidation of the sample during the course of analysis. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 7.1 This test method covers a procedure for removal of organic material and subsequent conversion of phosphorus to phosphate ion in samples of unused lubricating oils, lubricating oil additives, and their concentrates. 12.1 This test method covers determination of total phosphorus in concentrations of less than two mass % (see Note 6), calculated on the basis of the original test specimen, in samples treated by the acid-oxidation procedure described in Sections 7-11. Note 6—For phosphorus concentrations greater than or equal to two mass %, see Sections 19-25. 19.1 This test method covers the determination of total phosphorus in concentrations of 2 mass % or more, (see Note 10), calculated on the basis of the original sample, in samples treated by the acid-oxidation procedure described in Sections 7-11. Note 10—For phosphorus concentrations less than 2 mass %, see Sections 12-18.

GSO ASTM D1091:2015相似标准


推荐

浅谈润滑检测标准及润滑油检测项目有哪些

-1988 润滑油及燃料油总氮含量测定法(改进克氏法)    NB/SH/T 0059-2010 润滑油蒸发损失测定 诺亚克法    NB/SH/T 0306-2013 润滑油承载能力评定FZG目测法    NB/SH/T 0822-2010 润滑油、硫、钙含量测定 能量色散X射线荧光光谱法    NB/SH/T 0824-2010 润滑油添加剂元素含量测定 电感耦合等离子体原子发射光谱法...

空中课堂 | ICP/XRF光谱仪在润滑油添加剂检测应用

点击蓝字关注我们等离子体发射光谱仪和X射线荧光光谱仪广泛应用于润滑油添加剂元素检测。例如:铝、铜、镍或铁等磨损金属可指示油润部件磨损,并可在磨损达到临界水平时发出信号。其他元素如硅、镁或钾存在则会显示出润滑油受到污染程度。通过测量钼、钙、钡、锌等元素可以精确监测添加剂有效含量。德国斯派克分析仪公司等离子体发射光谱仪用于检测油品添加剂、磨损金属成分。...

| ICP/XRF光谱仪在润滑油、润滑脂分析应用

工具二,X射线荧光光谱仪,适用标准:SH/T0631润滑油添加剂钡、钙、、硫测定法(X射线荧光光谱法)ASTM D7751采用X射线荧光光谱仪分析法测定润滑油添加剂(Mg、P、S、Cl、Ca、Zn、Mo)标准试验方法ASTM D6481-2014 采用能量色散X射线荧光光谱法测定润滑油, 硫, 钙标准试验方法03奖品预览直播期间会抽取幸运观众,奖励小度音响、不锈钢杯子、腰包。...

网络讲座12.21 | ICP/XRF光谱仪在润滑油、润滑脂分析应用

工具二,X射线荧光光谱仪,适用标准:SH/T0631润滑油添加剂钡、钙、、硫测定法(X射线荧光光谱法)ASTM D7751采用X射线荧光光谱仪分析法测定润滑油添加剂(Mg、P、S、Cl、Ca、Zn、Mo)标准试验方法ASTM D6481-2014 采用能量色散X射线荧光光谱法测定润滑油, 硫, 钙标准试验方法03奖品预览直播期间会抽取幸运观众,奖励小度音响、不锈钢杯子、腰包。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号