BS 812-104:1994
集料试验.集料的定性和定量岩相检验方法

Testing aggregates - Method for qualitative and quantitative petrographic examination of aggregates


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 BS 812-104:1994 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
BS 812-104:1994
发布
1994年
发布单位
英国标准学会
替代标准
BS 812-104:1994(2011)
当前最新
BS 812-104:1994(2011)
 
 
被代替标准
88/13739 DC-1988
适用范围
This Part of BS 812 describes a general method for the examination of samples of coarse or fine aggregates to determine petrographic composition and to assist in the assessment of those aggregates for potential suitability for the intended use. The results relate only to the sample received at the laboratory and not necessarily to the deposit from which the samples are derived. The method is applicable to the determination of the proportion of any recognizable mineral or rock type, irrespective of the amount of such material, in the sample. The major application of the method described is in the examination and assessment of processed aggregates.

BS 812-104:1994相似标准


推荐

混凝土碱骨料反应试验箱 碱骨料试验使用说明

五、混凝土碱骨料反应试验试验准备:1.水泥:检定一般集料活性时,应使用含碱量高于0.8%硅酸盐水泥。对于具体工程,如使用几种水泥,含碱量大于0.6%水泥均应进行试验。2.集料:对于砂料使用工程实际采用或拟用砂,对于集料应把活性,非活性集料分别破碎成表T0325-1所示级配,并根据岩相检验结果将活性与非活性集料按比例组成试验用砂。3.砂浆配合比:水泥与砂浆质量比为1:2.25。...

石粉含量测定仪工作原理

本方法适用于小于2.36mm或小于0.15mm集料,也可用于矿粉质量检验。当细集料0.075mm通过率小于3%时,可不进行此项试验即作为合格看待。   ...

集料分样器用途

用途:该仪器采用了先进调频、数控、技术,提高了试验精度与速度。是试验室必备之专用仪器。本方法适用于确定细集料中是否存在膨胀性粘土矿物,并测定其含量,以评定集料洁净程度,以亚甲蓝值MBV表示。本方法适用于小于2.36mm或小于0.15mm集料,也可用于矿粉质量检验。当细集料0.075mm通过率小于3%时,可不进行此项试验即作为合格看待。 ...

沥青需要做哪些试验

(水泥混凝土用砂)D-26.2 砂筛分试验记录表(沥青路面用砂)D-27 砂表观密度(视比重)、堆积密度(松容重)紧装密度(紧密容重)试验记录D-28 砂吸水率、表面含水率试验记录D-29 砂(石)含水率试验记录D-30 砂(石)含泥量试验记录D-31 砂有机质含量试验记录D-32 粗集料技术性质试验报告D-33.2 粗集料筛分试验记录(方孔筛)D-34 粗集料表观密度(视比重)及饱和面干密度试验记录...


谁引用了BS 812-104:1994 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号