SAE J1805-2008
工作机械静态和就地动态方法的声功率级测量

Sound Power Level Measurements of Work Machines— Static and In-Place Dynamic Methods

2013-09

 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 SAE J1805-2008 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
SAE J1805-2008
发布
2008年
发布单位
SAE - SAE International
替代标准
SAE J1805-2013
当前最新
SAE J1805-2013
 
 
适用范围
This SAE Standard is used to determine the exterior A-weighted equivalent sound power level of static and in-place dynamic machines (dozer@ loader@ excavator@ and backhoe) similar to the sound power obtained in ISO 6393 static and ISO 6395 dynamic sound power test procedures. Additional machine types@ specifically sweepers and scrubbers@ covered by SAE J2130 have been added@ and other work machine types covered by SAE J1116 may be added with appropriate cycle descriptions and machine preparation. The recommended test procedures include conventional integrating sound pressure level methods or the sound intensity method using paired microphones. The sound intensity methodology provides a practical indoor alternative and permits measurement in the factory environment. The procedures in this document assume that the dominant sources are not highly sensitive to load (i.e.@ cooling fan@ engine@ track system). This test can be used as a substitute for the ISO 6393 static and ISO 6395 dynamic sound power tests for many machine types. The requirements for the machine setup and operation@ and the microphone array and hemispherical measurement surface are given in this document. This document shall be used in conjunction with instrumentation manufacturer's recommendations and ISO 9614-1. The accompanying sound intensity procedure clarification is provided pending more widespread understanding of sound intensity.

SAE J1805-2008相似标准


推荐

市场监管总局通报2019年量监督抽查情况

抽查了9个省(市)75家企业生产75批次安全带产品,其中7批次产品不合格,不合格发现率为9.3%。重点对金属零部件盐雾试验、整体静态负荷、整体滑落、整体动态负荷、零部件静态负荷、零部件动态负荷、零部件机械性能等7个项目进行了检验。不合格项目涉及金属零部件盐雾试验、整体静态负荷、整体滑落、整体动态负荷、零部件静态负荷、零部件动态负荷。(十一)容积式空气压缩机。...

质检总局解读:35项计量基准通过评审新纳入国家量值传递体系

二、几何量领域(2项)“633nm波长副基准装置”(中测院航空工业304所各1项)实现了从单一参数向综合参数、从中等尺寸向极限尺寸、从静态动态、从离线向实时在线发展,解决了微纳技术快速精确测量问题,检测效率由2台件/月升至30台件/月,为高端装备、集成电路智能制造所需共性基础材料研究,提供更为精准、在线纳米小尺寸量值溯源服务,并走出实验室为天文学、光学、工程测量、海洋学、波谱分析等精密测量领域广泛使用...

机械分析(DMA)基本信息介绍

  动态机械分析是通过对材料样品施加一个已知振幅频率振动,测量施加位移产生力,用以精确测定材料粘弹性,杨氏模量(E*)或剪切模量(G*)。 可分为:  1、热膨胀法  热膨胀法是在程序控温下,测量物质在可忽略负荷时尺寸与温度关系技术。  2、静态机械分析法  静态机械分析法是在程序控温下,测量物质在非振动负荷下温度与形变关系技术。  ...

实验室分析方法--典型热分析法介绍-热机械分析(DMA)

动态机械分析是通过对材料样品施加一个已知振幅频率振动,测量施加位移产生力,用以精确测定材料粘弹性,杨氏模量(E*)或剪切模量(G*)。 可分为:1、热膨胀法:热膨胀法是在程序控温下,测量物质在可忽略负荷时尺寸与温度关系技术。2、静态机械分析法:静态机械分析法是在程序控温下,测量物质在非振动负荷下温度与形变关系技术。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号