EN 60770-1:2011
用于工业过程控制系统的变送器 第1部分:性能评估方法(保持最新)

Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation (Remains Current)


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 EN 60770-1:2011 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
EN 60770-1:2011
发布
2011年
发布单位
CENELEC - European Committee for Electrotechnical Standardization
当前最新
EN 60770-1:2011
 
 
适用范围
Scope and object This part of IEC 60770 is applicable to transmitters which have either a standard analogue electric current output signal or a standard pneumatic output analogue signal in accordance with IEC 60381-1 or IEC 60382. The tests detailed herein may be applied to transmitters which have other output signals@ provided that due allowance is made for such differences. For the evaluation of the intelligent transmitters see IEC 60770-3. For certain types of transmitters where the sensor is an integral part@ other specific IEC or ISO standards may need to be consulted (e.g. for chemical analysers@ flowmeters@ etc.) This standard is intended to specify uniform methods of test for the evaluation of the performance of transmitters with pneumatic or electric output signals. The methods of evaluation specified in this standard are intended for use by manufacturers to determine the performance of their products and by users or independent testing establishments to verify manufacturers' performance specifications. The test conditions defined in this standard@ for example the range of ambient temperatures and power supply@ represent those which commonly arise in use. Consequently@ the values specified herein should be used where no other values are specified by the manufacturer. The tests specified in this standard are not necessarily sufficient for instruments specifically designed for unusually arduous or safety related duties. Conversely@ a restricted series of test may be suitable for instruments designed to perform within a more limited range of conditions. When a full evaluation in accordance with this standard is not required@ those tests which are required shall be performed and the results reported in accordance with those parts of the standard which are relevant.

EN 60770-1:2011相似标准


推荐

《温度变送器校准规范》开始征求意见啦~

本次修订依据是十多年来我国贯彻JJF 1183-2007经验以及最新国家标准:GB/T 17614.1-2015《工业过程控制系统变送器 第一部分性能评定方法》、GB/T 17614.1-2018《工业过程控制系统变送器 第三部分:智能变送器性能评定方法》。并参考了国际标准。...

从技术突破到行业标准制定 国产压力变送器发展迈上新台阶

因此,构建一种用于智能变送器设计评审和性能试验需要遵循方法十分必要。 《工业过程控制系统变送器 3部分:智能变送器性能评定方法》GB/T 17614.3-2013自2014年实施以来,部分规定已经不再适用于目前智能变送器性能评定。为此,全国工业过程测量控制和自动化标准化技术委员会归口上报了《工业过程控制系统变送器 3部分:智能变送器性能评定方法》GB/T 17614.3-2018。 ...

系统集成受重视 15项相关国家标准将制修订

同时本技术规范也已成功应用于家电行业、橡胶行业、汽车行业等多家企业信息化车间建设与改造项目。拟修订国家推荐标准《企业控制系统集成1部分:模型和术语》、《企业控制系统集成2部分:企业控制系统集成对象和属性》  标准将由北京机械工业自动化研究所负责主起草。修订将增强接口术语均匀性和一致性,降低与实施这些接口有关风险、成本和差错,使企业系统和控制系统可以互操作和易于集成。...

选择过程控制仪表前,为什么要先了解变送器

变送器强在哪由于调节器一般都在距离相对较远控制室中,变送器就成了信号产生和传输线驱动这两个功能复合体,成为了整个控制装置中心脏,有了它,才使得控制端和测量端联系起来,构成了整套控制系统变送器类别有的变送器中测量和变送单元做成为一体(如压力变送器),有的变送器则只有变送功能(如温度变送器)。变送器按驱动能源分类有气动变送器和电动变送器。其中,工业生产过程最常用是差压变送器和温度变送器。...


谁引用了EN 60770-1:2011 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号