GSO ISO 13653:2015
光学和光学装置 一般光学测试方法 像场相对亮度的测量

Optics and optical instruments -- General optical test methods -- Measurement of relative irradiance in the image field


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 GSO ISO 13653:2015 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
GSO ISO 13653:2015
发布
2015年
发布单位
GSO
当前最新
GSO ISO 13653:2015
 
 
适用范围
This International Standard is applicable to optical imaging systems in the optical spectral region from λ = 100 nm to λ = 1 μm. Theoretical reflections and the comparison with the calculation apply only to optical systems. These need not, however, be rotationally symmetric; anamorphic systems, for example, are included. Telescopic systems are also included. The title of this International Standard refers to the relative irradiance in the image field, but this standard is also applicable to determination of the relative radiant power. NOTE — For telescopic systems it will be suitable to state only the radiant power; for most imaging systems, the conversion from radiant power to irradiance will be easy. As far as measurements are concerned, this International Standard can also be applied to electro-optical systems. The two methods described differ particularly in the influence of veiling glare.

GSO ISO 13653:2015相似标准


推荐

影响显微成像质量因素--显微镜镜头

对于镜头设计及生产厂家,一般光学传递函数OTF(Optical Transfer Function)来综合评价镜头成像质量,光学系统传递亮度沿空间分布信息,光学系统在传递被摄景物信息时,被传递之各空间频率正弦波信号,其调制度位相在成实际变化,均为空间频率函数,此函数称为光学传递函数。...

成像式亮度色度计原理及应用

物面与亮度关系为:                             (1)式中:τ为光学系统透射比;n’n为物方折射率,通常n’≈ n ≈ 1。则上式简化为L’=τL。可以通过测量成像面上亮度测量发光体亮度。...

内窥镜光学测试系统用于医用内窥镜摄像系统测验

 内窥镜光学测试系统用于医用内窥镜摄像系统测验方法及所需测试设备,适用于内窥镜检查手术中作为内窥镜功能供给装置医用内窥镜摄像系统。  通过本测试方案可用于测量摄像系统亮度响应特性,摄像系统信噪比,摄像系统空间频率响应以及摄像系统静态图像宽容度。...

红外热像仪原理如何?

这种热像图与物体表面的热分布相对应;    实质上是被测目标物体各部分红外辐射分布图由于信号非常弱,与可见光图像相比,缺少层次立体感;    因此,在实际动作过程中为更有效地判断被测目标的红外热分布,常采用一些辅助措施来增加仪器实用功能;    如图像亮度、对比度控制,实标校正,伪色彩描绘等高线直方进行数学运算、打印等。   标签:   红外热像仪...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号