GSO ISO 1408:2015
橡胶 炭黑含量的测定 热分解法和化学分解法

Rubber -- Determination of carbon black content -- Pyrolytic and chemical degradation methods

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 GSO ISO 1408:2015 前三页，或者稍后再访问。

您也可以尝试购买此标准，
点击右侧 “立即购买” 按钮开始采购（由第三方提供）。

标准号

GSO ISO 1408:2015

发布

2015年

发布单位

GSO

当前最新

GSO ISO 1408:2015

 

 

适用范围

1.1 This International Standard specifies a pyrolytic method (A) and two chemical degradation methods (B and C) for the determination of the carbon black content of rubber. 1.2 Method A is preferred and should be used for the following polymers, except when certain compounding materials such as lead and cobalt salts, graphitic carbon blacks, phenolic and other resins, bitumen, or cellulose, etc., which cause the formation of a carbonaceous residue during pyrolysis, are present: — polyisoprene, natural or synthetic; — polybutadiene; — styrene-butadiene copolymers; — butyl rubber; — acrylate rubber; — ethylene-propylene copolymer; — ethylene-propylene terpolymer; — polyethers; — polyethylene-derived polymers; — silicone rubbers; — fluorosilicone rubbers; — chlorosulfonated polyethylenes containing less than 30 % (m/m) of chlorine. The precision of this method may be affected if mineral fillers, e.g. alumina or calcium carbonate, are present which decompose or dehydrate, or form volatile halides in the case of halogenated polymers, at the pyrolysis temperature. The method cannot be used for either chloroprene rubbers or butadiene-nitrile rubbers having an acrylic acid nitrile content greater than 30 % (m/m). 1.3 Method B is chiefly intended to be used with samples not amenable to the pyrolytic method A, although it can be used for all samples based on unsaturated rubbers except for isobutylene-isoprene copolymers. 1.4 Method C is relatively hazardous and should be used only for the analysis of samples based on isobutylene-isoprene copolymers and ethylene-propylene copolymers and related terpolymers when methods A and B fail.

GSO ISO 1408:2015相似标准

推荐