SAE AMS7701F-2010
镍铁合金 磁性 板材和带材退火
Nickel-Iron Alloy@ Magnetic@ Sheet and Strip Annealed
2010-10
购买全文，请联系:
- 标准号
- SAE AMS7701F-2010
- 发布
- 2010年
- 发布单位
- SAE - SAE International
- 当前最新
- SAE AMS7701F-2010
- 适用范围
- Form This specification covers two types of magnetic nickel-iron alloy in the form of sheet and strip. Application These products have been used typically for magnetic circuit parts that require high magnetic permeability at low flux densities with the fabricated parts to be annealed in dry hydrogen@ but usage is not limited to such applications. Classification The magnetic alloys covered by this specification are classified as follows: Type 1 - Nickel plus iron and other alloying elements@ usually copper and chromium. Type 1 may be required for applications involving severe forming. Type 2 - Nickel plus iron and other alloying elements@ usually copper and/or molybdenum. Unless a specific type is specified@ either type may be supplied.
SAE AMS7701F-2010相似标准
推荐
GH3044比重
一、GH3044镍基高温合金概述： GH3044是固溶强化镍基合金，在900℃以下具有高的塑性和中等的热强性，并具有优良的性和良好的冲压、焊接工艺性能，适宜制造在900℃以下工作的航空发动机主燃烧室和加力燃烧室零部件以及隔热屏、导向叶片，供应的品种有板材、带材、丝材、棒材和环形件等。...
GH4145(GH145)高温合金概述
，板材、带材和管材为：ω(Mn)≤0.35%,ω(Si)≤0.35%。...
【材料课堂】热处理特辑-退火
退火之后材料的硬度有所降低。管材，板材，带材和线材等再结晶退火是在冷卷，冷拉或其他冷变形工艺中完成的。很多中间过程的退火也是需要的，因为冷变形比如冷卷，需要经过很多次的轧制才能变成钢带，而线和管材需要经过很多次才能达到最终尺寸。由于最后一次退火是在接近，或者之前，甚至有时是在冷变形之后完成的，因此在最终发货状态之前，对于退火产品有个表面质量的要求，那就是表面光亮。...