GSO ISO 15705:2013
水质需氧量化学指数（ST-COD）的测定小封闭刻度管法

Water quality – Determination of the chemical oxygen demand index (ST-COD) – Small-scale sealed-tube method

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 GSO ISO 15705:2013 前三页，或者稍后再访问。

您也可以尝试购买此标准，
点击右侧 “立即购买” 按钮开始采购（由第三方提供）。

标准号

GSO ISO 15705:2013

发布

2013年

发布单位

GSO

当前最新

GSO ISO 15705:2013

 

 

适用范围

This International Standard specifies a method for the determination of the chemical oxygen demand (ST-COD) using the sealed tube method. The test is empirical and is applicable to any aqueous sample, which includes all sewage and waste waters. The method is applicable to undiluted samples having ST-COD values up to 1 000 mg/l and a chloride concentration not exceeding 1 000 mg/l. Samples with higher ST-COD values require predilution. For samples with a low COD, the precision of the measurement will be reduced and the detection limit will be poorer. Samples with a high chloride concentration will need to be prediluted to give a chloride concentration of approximately 1 000 mg/l or less before analysis. The method oxidizes almost all types of organic compounds and most inorganic reducing agents. It has a detection limit (4,65 times the within-batch standard deviation of a blank or very low standard) of 6 mg/l for photometric detection at 600 nm, and 15 mg/l for titrimetric detection as reported by one laboratory comparing the photometric and titrimetric techniques using a commercial test kit with a range up to 1 000 mg/l. The titrimetric part of this International Standard is applicable to samples exhibiting an atypical colour or turbidity after the digestion stage. NOTE A comparison between the full-scale method (ISO 6060) and the method of this International Standard is given in annex A. A discussion of possible hazards is given in annex B. Information on commercial small-scale test kits is given in annex C. The method can be used over a reduced range (see annexes D and E). For checking the chloride concentration, see annex F.

GSO ISO 15705:2013相似标准

推荐