GSO EN 196-7:2021
水泥测试方法 第7部分:水泥样品的采集和制备方法

Methods of testing cement — Part 7: Methods of taking and preparing samples of cement


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 GSO EN 196-7:2021 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
GSO EN 196-7:2021
发布
2021年
发布单位
GSO
当前最新
GSO EN 196-7:2021
 
 
适用范围
This European Standard describes the equipment to be used, the methods to be followed and the provisions for taking samples of cement, representative of given lots for testing, to assess the quality of products prior to, during or after delivery. The provisions of this standard are only applicable when samples of cement are: a) required for evaluating the conformity of a cement at any time with a standard; or b) requested for checking a delivery or a lot with a standard, the provisions of a contract or the specification in an order. The standard is applicable to the taking of samples of all types of cements defined by European Standards for cements whether they are: c) contained in silos; d) contained in bags, canisters, drums or any other packages; e) transported in bulk in road vehicles, railway wagons, ships, etc. NOTE The requirements of this standard can also, by agreement between the parties, be followed for acceptance inspections for all non-standardized hydraulic binders.

GSO EN 196-7:2021相似标准


推荐

核磁共振数据分析混凝土孔隙率与抗盐冻关系

原因同样在于样品中含有一定数 量顺磁性物质,导致其在相对高场强下,其弛豫加快,使得部分样品信号无法采集,因此磁场越高,信号幅值越小。而对于2M 设备采集数据峰位置相对于12M设备采集数据明显向右移动,这是由于2M 设备上TE 回波时间较长所致,使得初始时刻部分 有效信号无法采集,针对这种混凝土中含有粉煤灰情况,应该对2M 设备进行必要改进。...

“水去哪里了”—核磁共振探究水泥浆体早期演变进程

泌水源自可流动样本中普遍存在可动水。3.2 CT测试水体积分数及三维图像CT成像是一种样本无损成像技术,可以用来分析水泥基材料微观结构、耐久性骨料分布。我们可以通过采集二维三维图像定性定量分析材料变化,通过强度范围灰度值差异深入分析样本密度化学组分。本文空间分辨率为1.2um。对两个样本(REFC50/Cc30/L15)制备后在-5℃环境下扫描1h。...

你知道使用快速导热仪时有哪些优越性么

,意味着样品可以重复使用;   6、探头采用双螺旋线结构进行设计,结合专属数学模型,利用核心算法对探头上采集数据进行分析计算;   7样品结构设计巧妙,操作方便,适合放置不同厚度样品,同时简洁美观;   8、探头上数据采集使用了进口数据采集芯片,该芯片高分辨率,能使测试结果更加准确可靠;   9、主机控制系统使用了ARM微处理器,运算速度比传统微处理器快,提高了系统分析处理能力...

颗粒特性对水泥性能影响及分析方法

激光法是国内外水泥行业普遍采用一种新粒度分布测定方法。四、水泥颗粒特性分析样品制备方法无论采用哪一种粒度分布测定方法,都是用少量样品来表征大量产品粒度分布特性。所以制备能充分反映整个产品颗粒特性样品是至关重要样品制备主要包括取样,介质选定,分散手段等三个方面。  1、取样:由于粒度分析是通过对少量样品测量来代表大量粉体粒度分布状况,因此要求取样具有充分代表性。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号