GSO ISO/IEC 8473-1:2021
信息技术 提供无连接模式网络服务的协议:协议规范 第1部分:

Information technology — Protocol for providing the connectionless-mode network service: Protocol specification — Part 1:


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 GSO ISO/IEC 8473-1:2021 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
GSO ISO/IEC 8473-1:2021
发布
2021年
发布单位
GSO
当前最新
GSO ISO/IEC 8473-1:2021
 
 
适用范围
This Recommendation | International Standard specifies a protocol that is used to provide the connectionless-mode Network service described in ITU-T Rec. X.213 | ISO/IEC 8348 and to perform certain Network layer management functions. The protocol relies upon the provision of an underlying connectionless-mode service by real subnetworks and/or data links. The underlying connectionless-mode service assumed by the protocol may be obtained either directly, from a connectionless-mode real subnetwork, or indirectly, through the operation of an appropriate Subnetwork Dependent Convergence Function (SNDCF) or Protocol (SNDCP) over a connection-mode real subnetwork, as described in ISO/IEC 8648. This Recommendation | International Standard specifies the operation of the protocol with respect to a uniform, abstract "underlying subnetwork service". Other Recommendations | International Standards specify the way in which this "underlying subnetwork service" is obtained from real subnetworks, such as those which conform to ISO/IEC 8802 or ISO/IEC 8208. The "underlying subnetwork service" may be obtained from real subnetworks other than those that are specifically covered by the other Recommendations | International Standards. This Recommendation | International Standard specifies: a) procedures for the connectionless transmission of data and control information from one Network entity to one or more peer Network entities; b) the encoding of the Protocol Data Units (PDUs) used for the transmission of data and control information, comprising a variable-length protocol header format; c) procedures for the correct interpretation of protocol control information; and d) the functional requirements for implementations claiming conformance to this Recommendation | International Standard. The procedures are defined in terms of: a) the interactions among peer Network entities through the exchange of protocol data units; b) the interactions between a Network entity and a Network service user through the exchange of Network service primitives; and c) the interactions between a Network entity and an abstract underlying service provider through the exchange of service primitives. This Recommendation | International Standard also provides the PICS proforma for this protocol, in compliance with the relevant requirements, and in accordance with the relevant guidance, given in ITU-T Rec. X.290 | ISO/IEC 9646-1

GSO ISO/IEC 8473-1:2021相似标准


推荐

EPON测试仪硬件平台设计与实现

为此将SRAM划分为3个独立存储区,并将读写时隙分配如下:1个时钟周期可往SRAM存储1区写EPON上行协议帧,2个时钟周期可往SRAM存储2区写EPON下行协议帧,3个时钟周期可往SRAM存储3区写统计信息帧和配置确认帧,4个时钟周期可从SRAM读出数据,从某一块存储区读出完整一帧后即切换到读另一块存储区。   ...

基于Profibus-DP现场总线气体质量流量控制器设计(二)

它支持Profibus-DP协议DP-V0、DP-V1和DP-V2子协议类型,内部集成4KB双口RAM,使其能独立处理更为复杂通信数据流,支持3.3V和5V电压源,在功能上更为经济、安全,采用SPI模式实现VPC3+S协议芯片与MCU主控芯片通信。...

汉威电子:500万元投资开云信息

三、投资协议主要内容   (一)主要交易方案   经协议各方约定,本次增资前开云信息注册资本为1,000万元,汉威电子以500万元对开云信息进行增资,出资额占开云信息增资后总股本10%,其中111.12万元用于增加注册资本,剩余部分列入资本公积金。汉威电子向开云信息一次性支付投资款项。  ...

基于Profibus-DP现场总线气体质量流量控制器设计

2.2 Profibus-DP总线接口模块   该部分硬件设计框图如图2所示,Profibus协议芯片采用VIPA公司为智能Profibus-DP从站提供芯片VPC3+S,它是Siemens公司SPC3芯片更新替代产品,兼容了SPC3全部功能,可直接与各种微处理控制器连接,以满足用户需要。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号