SAE J2487-2019
SAE J 2487-2019
SAE No. 2 Friction Test Machine 3600 rpm Stepped Power Test
SAE J2487-2019 发布历史
This SAE Recommended Practice is intended as the definition of a standard test@ but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No. 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutches with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. The specific purpose of this document is to define a 3600 rpm Stepped Power Test for the evaluation of wet friction system performance variation as a function of power level. This procedure uses an initial engagement speed of 3600 rpm and is intended as a standard procedure for common use by both suppliers and end users. The only variables selected by the supplier or user of the friction system are: a. Friction Material b. Fluid c. Reaction Plates These three variables must be clearly identified when reporting the results of using this test. If any of the test parameters or system hardware as described in this document are changed@ other than the friction material@ test fluid@ or reaction plates@ the data may not be reported as having been obtained using this document. This procedure is not intended to evaluate the initial coefficient or break-in characteristics. For this information@ refer to SAE J2490.
SAE J2487-2019由SAE - SAE International 发布于 2019-05-01，并于 2019-05-25 实施。
。
SAE J2487-2019的历代版本如下：
- 2000/04/01 SAE J2487-2000 SAE No.2摩擦试验机3600r/min阶断性动力试验
- 2007/05/01 SAE J2487-2007 美国机动工程师协会(SAE)2号摩擦试验机3600 r/min步进性动力试验
- 2012/05/31 SAE J2487-2012 SAE的第2号摩擦试验机3600 r/min时加强电力试验
- 2019/05/01 SAE J2487-2019 SAE J 2487-2019
- 标准号
- SAE J2487-2019
- 发布
- 2019年
- 发布单位
- SAE - SAE International
- 适用范围
- This SAE Recommended Practice is intended as the definition of a standard test@ but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No. 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutches with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. The specific purpose of this document is to define a 3600 rpm Stepped Power Test for the evaluation of wet friction system performance variation as a function of power level. This procedure uses an initial engagement speed of 3600 rpm and is intended as a standard procedure for common use by both suppliers and end users. The only variables selected by the supplier or user of the friction system are: a. Friction Material b. Fluid c. Reaction Plates These three variables must be clearly identified when reporting the results of using this test. If any of the test parameters or system hardware as described in this document are changed@ other than the friction material@ test fluid@ or reaction plates@ the data may not be reported as having been obtained using this document. This procedure is not intended to evaluate the initial coefficient or break-in characteristics. For this information@ refer to SAE J2490.