GSO ISO 14848:2015
塑料不饱和聚酯树脂 130°C反应性的测定

塑料不饱和聚酯树脂 130°C反应性的测定, 您可以免费下载预览页

非常抱歉，我们暂时无法提供预览，您可以试试：免费下载 GSO ISO 14848:2015 前三页，或者稍后再访问。

您也可以尝试购买此标准，
点击右侧 “立即购买” 按钮开始采购（由第三方提供）。

适用范围: This International Standard specifies a method of measuring — the time required for the temperature of a solution of unsaturated-polyester resin and a catalyst, heated in a thermostatically controlled bath at 130 °C, to rise • from 80 °C to 140 °C, • from 80 °C to the maximum temperature reached; — the maximum temperature reached; — the speed of the reaction, determined by drawing a tangent at the point of inflection of the temperature/time curve. It applies in particular to unsaturated-polyester resins processed at a temperature higher than 100 °C. NOTE — The results are closely linked to the conditions. The aim of this International Standard is to define them as exactly as possible, particularly the following: a) The quantity and form of the resin sample being examined (test tube diameter, height of resin in the tube). b) The rate at which the sample is heated in the bath. For example, the use of a liquid having a relatively low heat capacity (ethylene glycol, silicone oil) leads to slower heating. c) The type of thermometer used. Thermometers having a response slower than that of a thermocouple, and resistance probes having too large a heat-sensitive element, are unsuitable. d) The position of the heat-sensitive element in the resin, both heightwise and relative to the axis of the test tube containing the resin. e) The nature of the catalyst.

GSO ISO 14848:2015塑料 不饱和聚酯树脂 130°C反应性的测定