CAN/ULC-S135-1992(R1998)由SCC 发布于 1992-11-30。
CAN/ULC-S135-1992(R1998)在国际标准分类中归属于: 19.040 环境试验。
CAN/ULC-S135-1992(R1998) 的最新版本是哪一版？
最新版本是 CAN/ULC-S135-1992(R1998) 。
1.1 This test method determines the degree of combustibility of building materials by measuring the heat release rate from specimens exposed to radiant heat using the test apparatus, specimen configurations and procedures described. 1.2 This test method determines the amount of heat that may be contributed to a fire involving products made from the same material as that of the test specimen. 1.3 This test method provides for radiant thermal exposure of a specimen. An external source of ignition is provided by an electric spark. 1.4 This test method is based on the observation that generally, the net heat of combustion of a material is directly related to the quantity of oxygen required for its combustion. *This relationship is such that approximately 13.1 x 10³ kJ of heat are released per 1.0 kg of oxygen consumed. 1.5 Heat release is measured from the moment the specimen is subjected to the radiant thermal exposure of a conical heater and is continued for 15 min. 1.6 The primary measurements are oxygen concentration and exhaust flow rate. Provision is also made for measurement of mass-loss rate and time to sustained flaming. 1.7 This test method is used to evaluate specimens in a horizontal orientation under an external heating flux exposure of 50 kW/m². The specimen, once ignited, is also heated by its own flame. NOTE: The test apparatus has provision for testing specimens in a vertical orientation. Discussion on such testing may be found in Appendix B.
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号