GSO IEC 60034-3:2014由GSO 发布于 2014-12-25。
GSO IEC 60034-3:2014在国际标准分类中归属于: 29.160 旋转电机。
GSO IEC 60034-3:2014 旋转电机 第3部分:蒸汽轮机或燃烧驱动的燃气轮机驱动的同步发电机的特殊要求的最新版本是哪一版?
最新版本是 GSO IEC 60034-3:2014 。
This part of IEC 60034 applies to three-phase synchronous generators, having rated outputs of 10 MVA and above driven by steam turbines or combustion gas turbines. It supplements the basic requirements for rotating machines given in IEC 60034-1. Common requirements are prescribed together with specific requirements for air, for hydrogen or for liquid cooled synchronous generators. This part of IEC 60034 also gives the precautions to be taken when using hydrogen cooled generators including: – rotating exciters driven by synchronous generators; – auxiliary equipment needed for operating the generators; – parts of the building where hydrogen might accumulate. NOTE 1 These requirements also apply to a synchronous generator driven by both a steam turbine and a combustion gas turbine as part of a single shaft combined cycle unit. NOTE 2 These requirements do not apply to synchronous generators driven by water (hydraulic) turbine or wind turbine. NOTE 3 The precautions to be taken when using hydrogen are valid for all cases where hydrogen is used as a coolant.
发电机是将其他形式的能源转换成电能的机械设备,它由水轮机、汽轮机、柴油机或其他动力机械驱动; 将水流,气流,燃料燃烧或原子核裂变产生的能量转化为机械能传给发电机,再由发电机转换为电能。 发电机在工农业生产,国防,科技及日常生活中有广泛的用途。 发电机的形式很多,但其工作原理都基于电磁感应定律和电磁力定律。 ...
发电机是将其他形式的能源转换成电能的机械设备,它由水轮机、汽轮机、柴油机或其他动力机械驱动,将水流,气流,燃料燃烧或原子核裂变产生的能量转化为机械能传给发电机,再由发电机转换为电能。发电机在工农业生产,国防,科技及日常生活中有广泛的用途。 发电机的形式很多,但其工作原理都基于电磁感应定律和电磁力定律。...
更大型的发电站能够产生几百兆瓦 (MW) 的电力,足以给整个大城市供电。发电时可以使用各种各样的燃料,例如褐煤、硬煤、原油和天然气。但基本原理通常是一样的:燃料燃烧产生热量,热量用于加热水。这一过程会产生高压的水蒸气。水蒸气随后驱动连接电流发生器的汽轮机。发电机产生电力并被传输至高压电线。因此,电力能够被远程传输。...
涡轮是一种将流动工质的能量转换为机械功的旋转式动力机械。它是航空发动机、燃气轮机和蒸汽轮机的主要部件之一。 德国LOBA涡轮的工作原理 德国LOBA涡轮增压简称TURBO,如果在轿车尾部看到TURBO或者T,即表明该车采用的发动机是涡轮增压发动机。 例如大众宝来的1.8T、帕萨特的1.8T、奥迪的2.0T等等。这些汽车的发动机工作,是靠燃料在发动机气缸内燃烧作功,从而对外输出功率。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号