EN ISO 24598:2019
焊接消耗品.耐蠕变钢潜弧焊用实心焊丝,管状芯焊条和焊条/焊剂组合件.分类

Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2019)

2019-11

 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 EN ISO 24598:2019 前三页,或者稍后再访问。

如果您需要购买此标准的全文,请联系:

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
EN ISO 24598:2019
发布
2019年
发布单位
欧洲标准化委员会
当前最新
EN ISO 24598:2019
 
 
适用范围
This document specifies requirements for classification of solid wire electrodes, tubular cored electrodes and electrode/flux combinations (all-weld metal deposits) for submerged arc welding of creep resisting and low-alloy elevated-temperature application steels. One electrode can be tested and classified with different fluxes. The solid wire electrode is also classified separately based on its chemical composition. This document is a combined specification providing a classification system based on either: — the chemical composition of the solid wire electrode and all-weld metal deposit; or — the tensile strength of the all-weld metal deposit and the chemical composition of the solid wire electrode and all-weld metal deposit obtained with the electrode/flux combination. Clauses, subclauses and tables which carry the suffix letter "A" are applicable only to solid wire electrodes, tubular cored electrodes and all-weld metal deposits classified in accordance with the system based upon chemical composition. Clauses, subclauses and tables which carry the suffix letter "B" are applicable only to solid wire electrodes, tubular cored electrodes and all-weld metal deposits classified in accordance with the system based upon the tensile strength of all-weld metal deposits and the chemical composition of solid wire electrodes and all-weld metal deposits. Clauses, subclauses and tables which do not have either the suffix letter "A" or the suffix letter "B" are applicable to all solid wire electrodes, tubular cored electrodes and electrode/flux combinations classified under this document.

EN ISO 24598:2019相似标准


推荐

【材料课堂】这些焊接基础知识,您掌握了吗?

什么叫焊接材料,包括哪些内容? 答:焊接材料包括焊条焊丝焊剂、气体、电极、衬垫等。2.什么叫焊丝? 答:焊接时作为填充金属,同时用来导电的金属丝—叫焊丝。分实心焊丝焊丝两种。常用的实心焊丝型号:ER50-6(牌号:H08Mn2SiA)。 3.为什么MAG焊接接头比CO2焊接接头的冲击韧性高? 答:MAG焊接时,活性气体仅为20%,焊丝中的合金元素过渡系数高,焊缝的冲击韧性高。...

各种焊接缺陷图解及原因预防措施(收藏备用)

使用焊条不当.(2)焊条潮湿.(3)母材冷却过速.(4)焊条不洁及的偏析.(5)含碳、锰成分过高.(1)使用适当焊条,如无法消除时低氢型焊条.(2)使用干燥过的焊条.(3)减低焊接速度,避免急冷,最好施以预热或后热.(4)使用良好低氢型焊条.(5)使用盐基度较高焊条.偏(Arc Blow)(1)在直流电焊时,所生磁场不均,使电弧偏向.(2)接地线位置不佳.(3)焊枪拖曳角太大.(4)...

【材料课堂】图解焊接缺陷大全

,铝合金等).(1)注意适当开槽角度与电流的配合,必要时要加大开槽角度.(2)采用含碳量低的焊条.(3)第一道焊着金属须充分能抵抗收缩应力.(4)改良结构设计,注意焊接顺序,后进行热处理.(5)注意焊丝保存.(6)注意组合之精度.(7)注意正确的电流及焊接速度.埋焊接(1)对焊缝母材所用的焊丝焊剂之配合不适当(母材含碳量过大,焊丝金属含锰量太少).(2)焊道急速冷却,使热影响区发生硬化.(...

焊接缺陷产生原因及防止措施(图文并茂,必须收藏!)

使用焊条不当.(2)焊条潮湿.(3)母材冷却过速.(4)焊条不洁及的偏析.(5)含碳、锰成分过高.(1)使用适当焊条,如无法消除时低氢型焊条.(2)使用干燥过的焊条.(3)减低焊接速度,避免急冷,最好施以预热或后热.(4)使用良好低氢型焊条.(5)使用盐基度较高焊条.偏(Arc Blow)(1)在直流电焊时,所生磁场不均,使电弧偏向.(2)接地线位置不佳.(3)焊枪拖曳角太大.(4)...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号