This document specifies the test procedures of electronic fee collection (EFC) roadside equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing which is within the realm of EFC application specifically. The scope of this document is restricted to systems operating within the radio emission, electromagnetic compatibility (EMC) regulations, traffic, and other regulations of the countries in which they are operated. This document identifies a set of suitable parameters and provides test procedures to enable the proof of a complete EFC system, as well as components of an EFC system, e.g. OBE, related to the defined requirements of an application. The defined parameter and tests are assigned to the following groups of parameters: — functionality; — quality; — referenced pre-tests. An overview of the tests and parameters provided by this document is given in 5.1 and 5.2. This document describes procedures, methods and tools, and a test plan which shows the relation between all tests and the sequence of these tests. It lists all tests that are required to measure the performance of EFC equipment. It describes which EFC equipment is covered by the test procedures; the values of the parameters to be tested are not included. It also describes how the tests are to be performed and which tools and prerequisites are necessary before this series of tests can be undertaken. It is assumed that the security of the system is inherent in the communications and EFC functionality tests, therefore they are not addressed here. All tests in this document provide instructions to evaluate the test results. This document defines only the tests and test procedures, not the benchmark figures that these are to be measured against. The test procedures defined in this document can be used as input, e.g. by scheme owners, for prototype testing, type approvals, tests of installations and periodic inspections. Related to a conceptual model of an EFC system, this document relates only to the equipment of the user and the service provider. Any other entities are outside the scope of document. EFC systems for dedicated short-range communication (DSRC) consist, in principle, of a group of technical components, which in combination fulfil the functions required for the collection of fees by electronic automatic means. These components comprise all, or most, of the following: — OBE within a vehicle; — OBE containing the communications and computing sub-functions; — optional integrated circuit card which may carry electronic money, service rights, and other secured information; — communication between OBE and RSE based on DSRC; — equipment for the fee collection at the RSE containing the communications and computing sub-functions; — equipment for the enforcement at the roadside; — central equipment for the administration and operation of the system. The scope of this document relates solely to OBE and RSE and the DSRC interface between OBE and RSE including its functions to perform the fee collection. All the equipment used for enforcement (e.g. detection, classification, localization, and registration) and central equipment are outside the scope of this document.
EN ISO 14907-1:2020由欧洲标准化委员会 IX-CEN 发布于 2020-07-01,并于 2020-10-31 实施,于 2021-01-31 废止。
EN ISO 14907-1:2020在国际标准分类中归属于: 35.240.60 信息技术在运输和贸易中的应用。
非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 EN ISO 14907-1:2020 前三页,或者稍后再访问。
点击下载后,生成下载文件时间比较长,请耐心等待......
根据DIN EN ISO 8655 第2部分中的表1,按移液器标称容量定义了最大允许系统误差和随机误差,测试程序取决于该移液器是固定容量还是可变容量。固定容量的移液器 可变容量的移液器必须在标称容量下重复 10 次移液 必须在标称容量的10%、50%和100%下检查,每个容量重复 10 次移液操作流程在开始测试程序之前,可以输入并记录移液器吸头制造商、产品编号及批号。...
一般通风用空气过滤器: 第1部分:悬浮微粒(ePM)分类规范、技术、要点 第2部分:分级效率和气流阻力的测量 第3部分:重量效率和空气流动阻力与测试粉尘质量的测定 第4部分:确定最小分数测试效率的条件法 ISO 16890-1:2016建立了一套基于颗粒物(PM)的通用通风空气过滤器效率分类系统。它还提供了测试过程的概述,并指定了评估和标记过滤器以及记录测试结果的一般需求。...
分析和减少毒性的生物处理石油产品的终端罐底水 API PUBL 4608-1994 用户指南:生物监测程序用沉淀毒性测试评估 API PUBL 4607-1994 用户指南和技术资源文件:生物监测程序用沉淀物毒性测试评估 行业标准-医药,关于生物毒性的标准 YY/T 0127.9-2001 口腔材料生物学评价.第2单元:口腔材料生物试验方法.细胞毒性试验:琼脂覆盖法及分子滤过法...
Ray-Ran 测厚仪通过一个色彩触摸屏进行操作,功能不同的测量模式和用户定义运行程序确保满足各种不同的测试过程。测试参数可以根据国际测试标准设置或根据客户要求来改变。 Ray-Ran 测厚仪可以通过RS232接口连接器使用Microsoft Excel软件,所有测量和计算参数都有传输的日期/时间戳、仪表编号和校准日期。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号