IEC 62282-6-100:2010
燃料电池技术.第6-100部分:微型燃料电池动力系统.安全性

Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety

被代替

标准号

IEC 62282-6-100:2010

发布

2010年

发布单位

国际电工委员会

替代标准

IEC 62282-6-100:2010/COR1:2011

当前最新

IEC 62282-6-100:2010/AMD1:2012

 

 

引用标准

IEC 60050-426:2008 IEC 60079-15:2005 IEC 60086-4 IEC 60086-5 IEC 60695-1-1 IEC 60695-11-10 IEC 60695-2-11 IEC 60730-1:1999 IEC 60950-1:2005 IEC 61032:1997 IEC 62133:2002 IEC 62281:2004 IS ISO 15649 ISO 16000-3 ISO 16000-6 ISO 175 ISO 1817 ISO 188 ISO 9772

被代替标准

IEC 105/255/FDIS:2009 IEC/PAS 62282-6-1:2006 IEC/PAS 62282-6-1 Corrigendum 1:2007

适用范围

a) This consumer safety standard covers micro fuel cell power systems, micro fuel cell power units and fuel cartridges that are wearable or easily carried by hand, providing d.c. outputs that do not exceed 60 V d.c. and power outputs that do not exceed 240 VA. Portable fuel cell power systems that provide output levels that exceed these electrical limits are covered by IEC 62282-5-1. b) Externally accessible circuitry is therefore considered to be safety extra low voltage (SELV) circuitry as defined in IEC 60950-1:2005, and as limited power circuits if further compliance with 2.5 of IEC 60950-1:2005 is demonstrated. Micro fuel cell power systems or units that have internal circuitry exceeding 60 V d.c. or 240 VA should be appropriately evaluated in accordance with the separate criteria of IEC 60950-1:2005. c) This consumer safety standard covers all micro fuel cell power systems, micro fuel cell power units and fuel cartridges. This standard establishes requirements for all micro fuel cell power systems, micro fuel cell power units and fuel cartridges to ensure a reasonable degree of safety for normal use, reasonably foreseeable misuse, and consumer transportation of such items. The fuel cartridges covered by this standard are not intended to be refilled by the consumer. Fuel cartridges refilled by the manufacturer or by trained technicians shall meet all requirements of this standard. d) These products are not intended for use in hazardous areas as defined by IEV 426-03-01.

IEC 62282-6-100:2010相似标准

推荐