GSO IEC 60811-100:2013
光纤和电缆 非金属材料的测试方法 第100部分:概述

Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 GSO IEC 60811-100:2013 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
GSO IEC 60811-100:2013
发布
2013年
发布单位
GSO
当前最新
GSO IEC 60811-100:2013
 
 
适用范围
IEC 60811-100:2012 describes general requirements and considerations that are applicable to all the test methods given in the particular parts, unless otherwise specified. This first edition of IEC 60811-100 collects together general matters that apply to the restructured IEC 60811 series. A detailed explanation is provided in the Introduction. Annex A provides full information on the relation between the current and the previous series. This revised series of IEC 60811 is based upon the principle of "one test - one part". One significant technical change that now applies throughout the series is a defined minimum scheme for the presentation of test reports.

GSO IEC 60811-100:2013相似标准


推荐

用NBS烟密度箱测试塑料烟密度多少算标准?对照测试标准

 塑料烟密度测试标准:  GB/T8323.2-2008塑料烟生成2部分:单室法测定烟密度试验方法  ISO5659-1、ISO5659-2塑料-生烟性测定-2部分:单烟箱光密度测定  ASTME662烟雾比光密度固体材料产生标准测试方法   EN45545-2铁路车辆材料部件防火性能要求  样品要求:   GB/T8323标准规定了片状材料,样品尺寸为75mm*75mm复合材料或厚度不超过...

高低温拉力试验机满足各种材料高低温试验要求

试验机与高低温环境试验装置、大变形引伸计配合使用,可满足各种材料高低温强度试验要求,广泛应用于建筑建材、机械制造、电线电缆、橡胶塑料、汽车制造、减震系统等行业材料检验分析,是科研院校、大专院校、工矿企业、技术监督、商检仲裁等部门理想测试设备。  ...

粉末电阻率试验仪概述

参考标准:YS T 587.6-2006 炭阳极用煅后石油焦检测方法 6部分:粉末电阻率测定.pdf                GB/T 24525-2009 炭素材料电阻率测定方法                GB/T 24521-2018 炭素原料焦炭电阻率测定方法产品概述:粉末电阻率试验仪主要用于测量粉末材料电阻率试验专用仪器.由于粉末材料密实度不同,在松装振实密度条件下,所测试得到数据是不同...

实验室检验检测设备--拉力测试

剥离力测试价格可根据配置不同而不一样。剥离力测试仪可对橡胶、塑料、塑胶、薄膜、纺织、纤维、纳米材料、高分子材料、复合材料、包装带、纸张、电线电缆光纤光缆、安全带、保险带、皮革皮带、鞋类、胶带、聚合物、弹簧钢、轴承钢、不锈钢(以及其它高硬度钢)、铸件、钢板、钢带、有色金属、汽车零部件、合金材料及其它非金属材料和金属材料进行拉伸、压缩、弯曲、撕裂、90°剥离、180°剥离、延伸伸长率等试验。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号