This section of IEC 60534-6 is intended to permit a variety of positioning devices, which respond to a linear motion, to be mounted on the actuator of a control valve, either directly or by employing an intermediate mounting bracket. This section is applicable where interchangeability between actuators and positioners is desired. The following parameters define the intended applicability of this section for the guidance of manufacturers and users. - The standardized mounting applies only to positioners which are mounted on the side of the actuator. - The standardized mounting applies in general only to actuators which have a travel from 10 mm through 100 mm. - The standardized mounting is designed to cover three basic types of actuator designs (see figure 1): a) those with some form of cast or fabricated yoke to connect the actuator power unit to the valve; b) those which use some form of central tube yoke to connect the actuator power unit to the valve; c) those in which the yoke incorporates two or more columns or pillars to connect the actuator power unit to the valve.
IEC 60534-6-1-1997由国际电工委员会 IX-IEC 发布于 1997-08。
IEC 60534-6-1-1997 在中国标准分类中归属于: N16 执行器,在国际标准分类中归属于: 23.060.40 压力调节器。
非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 IEC 60534-6-1-1997 前三页,或者稍后再访问。
点击下载后,生成下载文件时间比较长,请耐心等待......
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号