BS IEC 61504-2000
核电站.对安全致关重要的测试设备和控制系统.对整个工厂范围的辐射监测

Nuclear power plants - Instrumentation and control systems important to safety - Plant-wide radiation monitoring

BS IEC 61504-2000 发布历史

This International Standard provides guidance on the design principles and performance criteria for computer-based radiation monitoring systems (RMS). Such systems are provided to integrate the monitoring of plant-wide processes, effluent streams, and area radiation. This standard describes the integration of functions including equipment such as those described in standards IEC 60761-1, IEC 60761-2, IEC 60761-3, IEC 60761-4, IEC 60761-5, IEC 60768, IEC 60910, IEC 60951-1 IEC 60951-2, IEC 60951-3, IEC 60951-4, IEC 60951-5, IEC 61031, and IEC 61250 into a plant-wide digital system. The requirements of system-level components (central computer, subsystem computers, operator consoles, and inter-connections) are discussed. For detection assemblies, processing units and alarm units, this standard contains only the requirements needed to allow connection into the centralized system. The standards referenced above contain the specific requirements for these components. This standard provides criteria for the interface between monitors of different safety classes. This standard integrates data processing, storage, optimization, and correlation of data flow and displays. This standard defines the communication criteria to link distributed radiation monitoring equipment in the plant with an open architecture configuration. This standard does not apply to the design and testing of detection and measurement assemblies and subassemblies except as necessary to define the interface with the plant-wide system. Certain RMS functions, or a complete centralized radiation monitoring system may be entirely implemented with direct-connected analogue/relay technology. This standard does not apply to such functions or systems.

BS IEC 61504-2000由英国标准学会 GB-BSI 发布于 2000-11-15，并于 2000-11-15 实施。

BS IEC 61504-2000 在中国标准分类中归属于: F60 核反应堆综合，在国际标准分类中归属于: 27.120.20 核电站、安全。

BS IEC 61504-2000的历代版本如下：

• 2000年11月15日 BS IEC 61504-2000 核电站.对安全致关重要的测试设备和控制系统.对整个工厂范围的辐射监测
• 2017年09月20日 BS IEC 61504-2017 核设施. 具有安全重要性的仪表和控制系统. 连续检测辐射和/或放射性水平的中心系统

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 BS IEC 61504-2000 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

BS IEC 61504-2000

发布日期

2000年11月15日

实施日期

2000年11月15日

废止日期

无

中国标准分类号

F60

国际标准分类号

27.120.20

发布单位

GB-BSI

代替标准

BS IEC 61504-2017

适用范围

This International Standard provides guidance on the design principles and performance criteria for computer-based radiation monitoring systems (RMS). Such systems are provided to integrate the monitoring of plant-wide processes, effluent streams, and area radiation. This standard describes the integration of functions including equipment such as those described in standards IEC 60761-1, IEC 60761-2, IEC 60761-3, IEC 60761-4, IEC 60761-5, IEC 60768, IEC 60910, IEC 60951-1 IEC 60951-2, IEC 60951-3, IEC 60951-4, IEC 60951-5, IEC 61031, and IEC 61250 into a plant-wide digital system. The requirements of system-level components (central computer, subsystem computers, operator consoles, and inter-connections) are discussed. For detection assemblies, processing units and alarm units, this standard contains only the requirements needed to allow connection into the centralized system. The standards referenced above contain the specific requirements for these components. This standard provides criteria for the interface between monitors of different safety classes. This standard integrates data processing, storage, optimization, and correlation of data flow and displays. This standard defines the communication criteria to link distributed radiation monitoring equipment in the plant with an open architecture configuration. This standard does not apply to the design and testing of detection and measurement assemblies and subassemblies except as necessary to define the interface with the plant-wide system. Certain RMS functions, or a complete centralized radiation monitoring system may be entirely implemented with direct-connected analogue/relay technology. This standard does not apply to such functions or systems.