BS ISO 13357-2-2005
石油产品.润滑油可过滤性测定.干油规程

Petroleum products - Determination of the filterability of lubricating oils - Procedure for dry oils

BS ISO 13357-2-2005 发布历史

This part of ISO 13357 specifies a procedure for the evaluation of the filtcrability of dry lubricating oils, particularly those designed for hydraulic applications. The procedure only applies to mineral-based oils, since fluids manufactured from other materials (e.g. fire-resistant fluids) might not be compatible with the specified test membranes. The range of application has been evaluated with oils of viscosity up to ISO viscosity grade (VG) 100, as defined in ISO 3448. Within the range described, the filterability as defined is not dependent on the viscosity of the oil. The procedure is not suitable for some hydraulic oils on which specific properties have been conferred by the use of insoluble/partially soluble additives, or by particularly large molecular species. NOTE Filterability is a prime requirement for lubricating oils used in hydraulic systems because of the fine filters used in this application. This part of ISO 13357 defines a method for assessing the filterability of dry oils. It is necessary to note that some oils exhibit poorer filterability characteristics in the presence of contaminating water. ISO 13357-1 applies to the investigation of the effect of water and high temperature on filterability, if an oil is used in applications where the presence of water in the oil is likely.

BS ISO 13357-2-2005由英国标准学会 GB-BSI 发布于 2005-11-18，并于 2005-11-18 实施。

BS ISO 13357-2-2005 在中国标准分类中归属于: E34 润滑油，在国际标准分类中归属于: 75.100 润滑剂、工业油及相关产品。

BS ISO 13357-2-2005的历代版本如下：

• 2005年11月18日 BS ISO 13357-2-2005 石油产品.润滑油可过滤性测定.干油规程
• 2017年07月06日 BS ISO 13357-2-2017 石油产品.润滑油可过滤性测定.干油规程

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 BS ISO 13357-2-2005 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

BS ISO 13357-2-2005

发布日期

2005年11月18日

实施日期

2005年11月18日

废止日期

无

中国标准分类号

E34

国际标准分类号

75.100

发布单位

GB-BSI

代替标准

BS ISO 13357-2-2017

适用范围

This part of ISO 13357 specifies a procedure for the evaluation of the filtcrability of dry lubricating oils, particularly those designed for hydraulic applications. The procedure only applies to mineral-based oils, since fluids manufactured from other materials (e.g. fire-resistant fluids) might not be compatible with the specified test membranes. The range of application has been evaluated with oils of viscosity up to ISO viscosity grade (VG) 100, as defined in ISO 3448. Within the range described, the filterability as defined is not dependent on the viscosity of the oil. The procedure is not suitable for some hydraulic oils on which specific properties have been conferred by the use of insoluble/partially soluble additives, or by particularly large molecular species. NOTE Filterability is a prime requirement for lubricating oils used in hydraulic systems because of the fine filters used in this application. This part of ISO 13357 defines a method for assessing the filterability of dry oils. It is necessary to note that some oils exhibit poorer filterability characteristics in the presence of contaminating water. ISO 13357-1 applies to the investigation of the effect of water and high temperature on filterability, if an oil is used in applications where the presence of water in the oil is likely.

BS ISO 13357-2-2005系列标准