DIN ISO 10889-7:2006
带圆柱柄的刀具夹.第7部分:锥形基座的F型刀柄
Tool holders with cylindrical shank - Part 7: Type F with taper seat (ISO 10889-7:2004);English version of DIN ISO 10889-7:2006-01
购买全文，请联系:
- 标准号
- DIN ISO 10889-7:2006
- 发布
- 2006年
- 发布单位
- 德国标准化学会
- 当前最新
- DIN ISO 10889-7:2006
- 引用标准
- ISO 10889-1 ISO 2768-1 ISO 2768-2 ISO 296
- 被代替标准
- DIN ISO 10889-7:2004 DIN 69880-7:2000
- 适用范围
- ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. This part of ISO 10889 specifies dimensions, designations and complementary technical delivery conditions for tool holders with taper seat of type F and with a cylindrical shank mounting system in accordance with ISO 10889-1. For non-standardized tool holders with taper seat, such as the tool holders shown in the figures, it is advisable to apply the corresponding specifications of this part of ISO 10889.
DIN ISO 10889-7:2006相似标准
推荐
拿起“放大镜”，在线测量要注意！
大赛测头操作步骤安装工件测头硬件并安装到主轴，测针对心调整；12试验测头与数控系统间的连接；正确放置环规，找正并完成测头的标定；34工件在线测量；1.安装工件测头硬件并安装到主轴，测针对心调整；具体包含▶ （1）将测头与刀柄连接。选手需熟悉测头硬件结构，操作该步骤时应注意：a.务必将最靠近刀柄的两个方向相对的螺栓拧紧，因为这两个螺栓是用来固定锥形垫圈拉紧测头用的，如图所示。...
Elcometer1538腐蚀测试划痕仪
0.5mm (0.02”) 刀具——盐喷测试K0001538M004Elcometer 1538 DIN 刻划器带 0.5mm (0.02”) 刀具——雷诺型K0001538M005Elcometer 1538 DIN 刻划器带1mm (0.04" ) 刀具——雷诺型重量113g (4oz)包装清单1538 DIN 刻划器, 六角钳, 刀具, 存放箱Elcometer1538腐蚀测试划痕仪Elcometer1538...