SAE J 2295-2006
六角头螺栓和六角螺母准帽螺钉用紧固件部件标准

Fasteners Part Standard Cap Screws, Hex Bolts, and Hex Nuts (inch Dimensioned)

SAE J 2295-2006 发布历史

This SAE Part Standard covers selected screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) fastener standards. This document covers materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners covered to be identified and ordered by a part or identifying number (PIN) as defined in this document. The purpose of this document is to assist the designer and other personnel in providing requirements and part identifying numbers for the most commonly used fasteners for ship systems and equipment. A part identification number (PIN) is normally required for all military applications and provides a useful means of communicating fastener requirements to suppliers and manufacturers in a very succinct manner.

SAE J 2295-2006由美国机动车工程师协会 US-SAE 发布于 2006-05-01。

SAE J 2295-2006 在中国标准分类中归属于: J13 紧固件，在国际标准分类中归属于: 21.060.01 紧固件综合。

SAE J 2295-2006 发布之时，引用了标准

• ASME B1.1-2003 统一标准英制螺纹(UN和UNR螺纹牙型)
• ASME B18.2.1-1996 英制方头和六角头螺栓和螺钉(英制系列)
• ASME B18.2.2-1987 英制四角和六角形螺母
• ASME B18.2.6-2006 用于结构的紧固件*， 2022-07-17 更新
• ASME B18.3-2003 六角键和花键圆柱头内六角有肩定位螺钉(英制系列)
• ASTM A307-2004 抗拉强度为60000PSI的碳素钢螺栓和螺柱的标准规范*， 2022-07-17 更新
• ASTM A325-2004 最小抗拉强度为120/105ksi的热处理钢结构螺栓标准规范*， 2022-07-17 更新
• ASTM A325-2006 最小抗拉强度为120/105ksi的热处理钢结构螺栓标准规范*， 2022-07-17 更新
• ASTM A354-2004 淬火与回火合金钢螺栓、螺柱及其他外螺纹紧固件标准规范*， 2022-07-17 更新
• ASTM A380-2006 不锈钢零件、设备及系统的清洗和除垢的标准操作规程*， 2022-07-17 更新

* 在 SAE J 2295-2006 发布之后有更新，请注意新发布标准的变化。

SAE J 2295-2006的历代版本如下：

• 2004年04月01日 SAE J 2295-2004
• 2006年05月01日 SAE J 2295-2006 六角头螺栓和六角螺母准帽螺钉用紧固件部件标准

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 SAE J 2295-2006 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

SAE J 2295-2006

发布日期

2006年05月01日

实施日期

废止日期

无

中国标准分类号

J13

国际标准分类号

21.060.01

发布单位

US-SAE

引用标准

ASME B1.1-2003 ASME B18.2.1-1996 ASME B18.2.2-1987 ASME B18.2.6-2006 ASME B18.3-2003 ASTM A153-1982 ASTM A193/A 193M-2006 ASTM A194/A 194M-2006 ASTM A307-2004 ASTM A325-2004 ASTM A325-2006 ASTM A342-1995 ASTM A354-2004 ASTM A380-2006 ASTM A449-2

被代替标准

SAE J 2295-2004

适用范围

This SAE Part Standard covers selected screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) fastener standards. This document covers materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners covered to be identified and ordered by a part or identifying number (PIN) as defined in this document. The purpose of this document is to assist the designer and other personnel in providing requirements and part identifying numbers for the most commonly used fasteners for ship systems and equipment. A part identification number (PIN) is normally required for all military applications and provides a useful means of communicating fastener requirements to suppliers and manufacturers in a very succinct manner.