BS EN 15058-2006
固定源辐射.一氧化碳质量浓度的测定(CO).参照法:非分散红外光谱法
Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: non-dispersive infrared spectrometry
BS EN 15058-2006 中，可能用到以下仪器设备
非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 BS EN 15058-2006 前三页，或者稍后再访问。
点击下载后，生成下载文件时间比较长，请耐心等待......
- 标准号
- BS EN 15058-2006
- 发布日期
- 2006年06月30日
- 实施日期
- 2006年06月30日
- 废止日期
- 无
- 中国标准分类号
- Z60
- 国际标准分类号
- 13.040.40
- 发布单位
- GB-BSI
- 引用标准
- ENV 13005 CEN/TS 14793 EN ISO 14956 ISO 5725-2 ISO 5725-6-1994
- 代替标准
- BS EN 15058-2017
- 适用范围
- This European Standard specifies the Standard Reference Method (SRM) for sampling, and determining carbon monoxide content in ducts and stacks emitting to atmosphere. It describes the Non Dispersive Infra-Red (NDIR) analytical technique, including the sampling system and sample gas conditioning system, to determine CO in flue gases. This European Standard is the reference method for periodic monitoring and for calibration or control of Automatic Measuring Systems (AMS) permanently installed on a stack, for regulatory purposes or other purposes. To be used as the SRM, it is necessary to demonstrate that the performance characteristics of the method are lower than the performance criteria defined in this European standard and that the overall uncertainty of the method is less than ± 6 % relative at the daily Emission Limit Value (ELV). NOTE When the NDIR method is used as an AMS, refer to EN 14181 and other relevant standards provided by CEN TC 264. It is necessary for anybody who would like to use an Alternative Method instead of this Standard Reference Method to work out the demonstration of the equivalence according to the Technical Specification TS 14793, providing that his capability to carry out this demonstration is officially recognised by his national accreditation body or law. This Standard Reference Method has been evaluated during field tests on waste incineration, co-incineration installations and large combustion plants. It has been validated for CO concentrations with sampling periods of 30 min in the range of 0 mg/m3 to 400 mg/m3 for large combustion plants and 0 mg/m3 – 740 mg/m3 for waste and co-incineration. For waste incineration plants, Council Directive 2000/76/EC lays down emission values which are expressed in mg/m3, on dry basis at a specified value of O2 and at reference conditions of 273 K and 101,3 kPa.