DIN EN 13836:2007
燃气中央供暖锅炉.标称热输入＞300kW、但＜1000kW的B型锅炉
Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW; English version of DIN EN 13836:2007-06
- 标准号
- DIN EN 13836:2007
- 发布
- 2007年
- 发布单位
- 德国标准化学会
- 替代标准
- DIN EN 13836:2007-06
- 当前最新
- DIN EN 13836:2007-06
- 引用标准
- EN 10029 EN 1057 EN 1092-1 EN 1092-2 EN 1092-3 EN 12067-1 EN 12067-2 EN 125 EN 126 EN 1561 EN 161 EN 1643 EN 1854 EN 257 EN 297 EN 298 EN 437:2003 EN 50165 EN 60335-1:2002 EN 60529 EN 60730-2-9 EN 656 EN 88 EN ISO 228-1 EN ISO 3166-1 ISO 7-1
- 被代替标准
- DIN 4702-3:1990
- 适用范围
- This European standard specifies the requirements and test methods concerning,in particular,the construction,safety,fitness for purpose,and rational ues of enery,as well as the classification and marking of gas-fired central heating boilers that are fitted with atmospheric burners,fan assisted atmospheric burners or fully premixed burners,and are hereafter referred to as"boilers". This European standard applies to boilers of type B,as listed in 4.2: - that use one or more combustible gases of the three gas families at the pressures states in Tables 16 and 17; - that have a nominal heat input(on the basis of net calorific value)exceeding 300kw,but not exceeding 1 000kw,including modular boilers; - where the temperature of the heat transfer fluid does not exceed 105℃ during normal operation; - where the maximum operating pressure in the water circuit does not exceed 6 bar; - that can give rise to condensation under certain circumstances; - of the standard and low-temperature types. This European standard applies to boilers desinged for sealed water systems or for open water systems. This European standard does not contain all the requirements necessary for boilers: - intended to be installed in the open or in living rooms; - permanently fitted with more than one flue outlet; - where the combustion circuit is sealed with respect to the room where the boiler is installed; - of the condensing type; - intened to be connected to a common flue having mechanical extraction; - fitted with a forced draught burner in accordance with EN 676(see EN 303-7); - producing hot water for domestic purposes. This standard only covers type testing. Matters related to quality assurance systems,tests during production,and certificates of conformity of auxiliary devices are not dealt with in this European Standard.