DIN EN 15553-2007
石油产品和相关原料.烃类型的测定.荧光指示剂吸附法

Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method; German version EN 15553:2007

DIN EN 15553-2007 发布历史

This European Standard specifies a fluorescent indicator adsorption method for the determination of hydrocarbon types over the concentration ranges from 5 % (V/V) to 99 % (V/V) aromatic hydrocarbons, 0,3 % (V/V) to 55 % (V/V) olefinic hydrocarbons, and 1% (V/V) to 95 % (V/V) saturated hydrocarbons in petroleum fractions that distil below 315 ℃. This method may be applicable to concentrations outside these ranges, but the precision has not been determined. When samples containing oxygenated blending components are analysed, the hydrocarbon type results can be reported on an oxygenate-free basis or, when the oxygenate content is known, the results can be corrected to a total-sample basis. This test method is for use with full boiling range products. Cooperative data have established that the precision statement does not apply to petroleum fractions with narrow boiling ranges near the 315 ℃ limit. Such samples are not eluted properly, and results are erratic. Samples containing dark-coloured components that interfere with reading the chromatographic bands cannot be analysed. NOTE I The oxygenated blending components methanol, ethanol, tert-butyl methyl ether (MTBE), methyl tert-pentyl ether (TAME) and tert-butyl ethyl ether (ETBE) do not interfere with the determination of hydrocarbon types at concentrations normally found in commercial blends. These oxygenated compounds are not detected since they elute with the alcohol desorbent. The effects of other oxygenated compounds should be individually verified. NOTE 2 For the purposes of this European Standard, the terms "% (m/m)" and "% (VA/)" are used to represent respectively the mass fraction and the volume fraction. WARNING m The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

DIN EN 15553-2007由德国标准化学会 DE-DIN 发布于 2007-07。

DIN EN 15553-2007 在中国标准分类中归属于: E30 石油产品综合，在国际标准分类中归属于: 75.080 石油产品综合。

DIN EN 15553-2007 发布之时，引用了标准

• EN 1601 *， 2017-08-01 更新
• EN 13132 石油及其产品的试验方法.液化石油产品.无铅汽油.使用柱转换气相色谱法测定有机氧饱和化合物的含量和有机束缚氧的总含量
• EN ISO 3170 石油液体.手工取样ISO 3170-2004;［使用:IP 475/2005］
• EN ISO 3171 石油液体.自动管道取样ISO 3171-1988;［使用:IP 476/02］
• EN ISO 3696 分析实验室用水.规范和试验方法(ISO 3696-1987)

* 在 DIN EN 15553-2007 发布之后有更新，请注意新发布标准的变化。

DIN EN 15553-2007的历代版本如下：

• 2007年07月 DIN EN 15553-2007 石油产品和相关原料.烃类型的测定.荧光指示剂吸附法

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 15553-2007 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 15553-2007

发布日期

2007年07月

实施日期

废止日期

无

中国标准分类号

E30

国际标准分类号

75.080

发布单位

DE-DIN

引用标准

EN 1601 EN 13132 EN ISO 3170 EN ISO 3171 EN ISO 3696

被代替标准

DIN EN 15553-2006

适用范围

This European Standard specifies a fluorescent indicator adsorption method for the determination of hydrocarbon types over the concentration ranges from 5 % (V/V) to 99 % (V/V) aromatic hydrocarbons, 0,3 % (V/V) to 55 % (V/V) olefinic hydrocarbons, and 1% (V/V) to 95 % (V/V) saturated hydrocarbons in petroleum fractions that distil below 315 ℃. This method may be applicable to concentrations outside these ranges, but the precision has not been determined. When samples containing oxygenated blending components are analysed, the hydrocarbon type results can be reported on an oxygenate-free basis or, when the oxygenate content is known, the results can be corrected to a total-sample basis. This test method is for use with full boiling range products. Cooperative data have established that the precision statement does not apply to petroleum fractions with narrow boiling ranges near the 315 ℃ limit. Such samples are not eluted properly, and results are erratic. Samples containing dark-coloured components that interfere with reading the chromatographic bands cannot be analysed. NOTE I The oxygenated blending components methanol, ethanol, tert-butyl methyl ether (MTBE), methyl tert-pentyl ether (TAME) and tert-butyl ethyl ether (ETBE) do not interfere with the determination of hydrocarbon types at concentrations normally found in commercial blends. These oxygenated compounds are not detected since they elute with the alcohol desorbent. The effects of other oxygenated compounds should be individually verified. NOTE 2 For the purposes of this European Standard, the terms "% (m/m)" and "% (VA/)" are used to represent respectively the mass fraction and the volume fraction. WARNING m The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

谁引用了DIN EN 15553-2007 更多引用