DIN EN 14652-2007
建筑物内水处理设备.薄膜分离设备.性能、安全和试验的要求

Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing（includes Amendment A1:2007） English version EN 14652:2007-09

DIN EN 14652-2007 发布历史

This European Standard specifies requirements relating to the construction, performance and methods of testing for membrane separation systems with a particle rating below 1μm,manely microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO) for drinking water installations inside buildings, intended to remove from the drinking water marginal concentrations of suspended and colloidal solids, microorganisms, organic molecules and/or to reduce the dissolved solids concentration and applies to systems with a minimum pressure of PN 10, connections between DN 15 and DN 100 and a maximum working temperature of at least 30℃. This European Standard applies to membrane separation systems, whose elements may be partly or entirely cleanable or disposable in accordance with the type of system. It only concerns units which are permanently connected to the mains supply at the point-of-use. A membrane separation system may include, together with the separation device pre-and/or post-treatment devices. For the scope of this European Standard: -- separation device shall comply with this European Standard, i.e. without pre-and/or post-treatment devices. -- where pre-and/or post-treatment devices are incorporated in the system, each of them shall conform to the relevant standard. If this is the case, the complete system shall be considered as conforming as a whole.

DIN EN 14652-2007由德国标准化学会 DE-DIN 发布于 2007-09。

DIN EN 14652-2007 在中国标准分类中归属于: Q81 供水、排水器材设备，在国际标准分类中归属于: 13.060.20 饮用水,91.140.60 供水系统。

DIN EN 14652-2007 发布之时，引用了标准

• EN 1092-1 *， 2018-04-01 更新
• EN 1092-2 法兰及其连接.按PN标注的管,管件,异形件和附件用圆形法兰.第2部分:铸铁法兰
• EN 1254-1 铜和铜合金管配件.第1部分:铜管用毛细钎焊管件(软钎焊和硬钎焊)
• EN 1567 建筑阀门.减水压阀门和组合减水压阀门.要求和试验
• EN 1717-2000 水设施中防止饮用水被污染的保护及防治回流污染设备的一般要求*， 2022-07-18 更新
• EN ISO 228-1 非螺纹密封的管螺纹.第1部分:标记,尺寸和公差 ISO 228-1-2000
• EN ISO 3696 分析实验室用水.规范和试验方法(ISO 3696-1987)
• EN ISO 3822 声学.由供水设施使用的仪器和设备发出噪音进行的实验室试验.第4部分:特殊管件用连接和操作条件
• ISO 7-1 用螺纹密封的管螺纹 第1部分:尺寸、公差与标记
• ISO 304 表面活性剂 用拉起液膜法测定表面张力
• ISO 1219-1 流体动力系统和部件.图形符号和电路图.第1部分:常规用途和数据处理应用的图形符号.修改件1*， 2016-04-15 更新
• ISO 12103-1 道路车辆. 过滤器评价用试验污染物. 第1部分: 亚利桑那州试验粉尘*， 2016-03-01 更新

* 在 DIN EN 14652-2007 发布之后有更新，请注意新发布标准的变化。

DIN EN 14652-2007的历代版本如下：

• 2006年03月 DIN EN 14652-2006 建筑物内水调节设备.薄膜分离设备.性能、安全和试验的要求.德文版本 EN 14652-2005
• 2007年09月 DIN EN 14652-2007 建筑物内水处理设备.薄膜分离设备.性能、安全和试验的要求

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 14652-2007 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 14652-2007

发布日期

2007年09月

实施日期

废止日期

无

中国标准分类号

Q81

国际标准分类号

13.060.20;91.140.60

发布单位

DE-DIN

引用标准

EN 1092-1 EN 1092-2 EN 1254-1 EN 1567 EN 1717-2000 EN ISO 228-1 EN ISO 3696 EN ISO 3822 ISO 7-1 ISO 304 ISO 1219-1 ISO 12103-1

被代替标准

DIN EN 14652-2006 DIN EN 14652/A1-2007

适用范围

This European Standard specifies requirements relating to the construction, performance and methods of testing for membrane separation systems with a particle rating below 1μm,manely microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO) for drinking water installations inside buildings, intended to remove from the drinking water marginal concentrations of suspended and colloidal solids, microorganisms, organic molecules and/or to reduce the dissolved solids concentration and applies to systems with a minimum pressure of PN 10, connections between DN 15 and DN 100 and a maximum working temperature of at least 30℃. This European Standard applies to membrane separation systems, whose elements may be partly or entirely cleanable or disposable in accordance with the type of system. It only concerns units which are permanently connected to the mains supply at the point-of-use. A membrane separation system may include, together with the separation device pre-and/or post-treatment devices. For the scope of this European Standard: -- separation device shall comply with this European Standard, i.e. without pre-and/or post-treatment devices. -- where pre-and/or post-treatment devices are incorporated in the system, each of them shall conform to the relevant standard. If this is the case, the complete system shall be considered as conforming as a whole.

DIN EN 14652-2007 中可能用到的仪器设备