DIN EN 13443-2-2007
建筑物内水调节设备.机械过滤器.第2部分:颗粒额定值1μm到80μm(不含80μm).性能、安全和测试要求

Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 Šm to less than 80 Šm - Requirements for performance, safety and testing; German version EN 13443-2:2005+A1:2007

DIN EN 13443-2-2007 发布历史

This document specifies requirements relating to the construction, performance and methods of testing for mechanical filters for the removal of suspended matter in drinking water installations inside buildings. It applies to filters with a filtration rating from 1 pm up to less than 80 μm and which are intended for use in systems with a minimum pressure rating of PN 6, connections between DN 15 and DN 100 and service temperature of less than 30 ℃. This document is applicable to back-washable filters, integral filters and those designed for replaceable cartridges. It only concerns units that are permanently connected to the mains supply at point of entry or point of use. Part 1 of this standard (EN 13443-1) is a separate document and deals with filters with a particle rating between 80 μm and 150 μm.

DIN EN 13443-2-2007由德国标准化学会 DE-DIN 发布于 2007-10。

DIN EN 13443-2-2007 在中国标准分类中归属于: Q81 供水、排水器材设备，在国际标准分类中归属于: 13.060.20 饮用水,91.140.60 供水系统。

DIN EN 13443-2-2007 发布之时，引用了标准

• EN 872 水质.悬浮固体的测定.用玻璃纤维过滤器过滤的方法
• EN 1717 水设施中防止饮用水被污染的保护及防治回流污染设备的一般要求*， 2022-07-18 更新
• EN 13443-1-2002 建筑物内水调节设备机械过滤器.第1部分:颗粒级80μm-150μm.性能,安全和测试要求;包含修改件A-2007*， 2022-07-18 更新
• ISO 304 表面活性剂 用拉起液膜法测定表面张力
• ISO 1219-1 流体动力系统和部件.图形符号和电路图.第1部分:常规用途和数据处理应用的图形符号.修改件1*， 2016-04-15 更新
• ISO 4021 液压传动 颗粒污染分析 从工作系统管路中提取油样
• ISO 12103-1 道路车辆. 过滤器评价用试验污染物. 第1部分: 亚利桑那州试验粉尘*， 2016-03-01 更新

* 在 DIN EN 13443-2-2007 发布之后有更新，请注意新发布标准的变化。

DIN EN 13443-2-2007的历代版本如下：

• 2007年10月 DIN EN 13443-2-2007 建筑物内水调节设备.机械过滤器.第2部分:颗粒额定值1μm到80μm(不含80μm).性能、安全和测试要求

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 13443-2-2007 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 13443-2-2007

发布日期

2007年10月

实施日期

废止日期

无

中国标准分类号

Q81

国际标准分类号

13.060.20;91.140.60

发布单位

DE-DIN

引用标准

EN 872 EN 1717 EN 13443-1-2002 ISO 304 ISO 1219-1 ISO 4021 ISO 12103-1

被代替标准

DIN EN 13443-2-2005 DIN EN 13443-2/A1-2007

适用范围

This document specifies requirements relating to the construction, performance and methods of testing for mechanical filters for the removal of suspended matter in drinking water installations inside buildings. It applies to filters with a filtration rating from 1 pm up to less than 80 μm and which are intended for use in systems with a minimum pressure rating of PN 6, connections between DN 15 and DN 100 and service temperature of less than 30 ℃. This document is applicable to back-washable filters, integral filters and those designed for replaceable cartridges. It only concerns units that are permanently connected to the mains supply at point of entry or point of use. Part 1 of this standard (EN 13443-1) is a separate document and deals with filters with a particle rating between 80 μm and 150 μm.

DIN EN 13443-2-2007系列标准

DIN EN 13443-2-2007 中可能用到的仪器设备