SAE AMS 4143E-2007
6.3Cu 0.3Mn 0.18Zr 0.10V 0.06Ti (2219-T6)溶解热处理和沉淀热处理的铝合金锻件和轧制或锻制环材

Aluminum Alloy Forgings and Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T6) Solution and Precipitation Heat Treated UNS A92219

SAE AMS 4143E-2007 发布历史

This specification covers an aluminum alloy in the form of die forgings, hand forgings, forged rings, rolled rings, and stock for forging or rings. These products have been used typically for structural, machined parts but usage is not limited to such applications. This material may be welded in the T6 condition but properties are improved by heat treatment after welding. Certain design and fabricating procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 823 recommends practices to minimize such conditions.

SAE AMS 4143E-2007由美国机动车工程师协会 US-SAE 发布于 2007-07-01。

SAE AMS 4143E-2007 在中国标准分类中归属于: V11 航空与航天用金属铸锻材料，在国际标准分类中归属于: 49.025.20 铝。

SAE AMS 4143E-2007 发布之时，引用了标准

• SAE AMS 2355H-2005 除锻坯、滚轧、锻造或闪焊环之外的铝合金、镁合金锻制品的质量保证取样和检验
• SAE AMS 2808D-2001 锻件鉴定[代替:SAE AMS-STD-184,SAE AMS-STD-184]
• SAE ARP 823D-1997 

SAE AMS 4143E-2007的历代版本如下：

• 2007年07月01日 SAE AMS 4143E-2007 6.3Cu 0.3Mn 0.18Zr 0.10V 0.06Ti (2219-T6)溶解热处理和沉淀热处理的铝合金锻件和轧制或锻制环材

SAE AMS 4143E-2007 6.3Cu 0.3Mn 0.18Zr 0.10V 0.06Ti (2219-T6)溶解热处理和沉淀热处理的铝合金锻件和轧制或锻制环材 由 SAE AMS 4143D-2001 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 SAE AMS 4143E-2007 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

SAE AMS 4143E-2007

发布日期

2007年07月01日

实施日期

废止日期

无

中国标准分类号

V11

国际标准分类号

49.025.20

发布单位

US-SAE

引用标准

ANSI H 35.2-2006 ANSI H 35.2M-2006 ASTM B 594-2006 ASTM B 660-2002 ASTM E 1417-2005 SAE AMS 2355H-2005 SAE AMS 2772-1997 SAE AMS 2808D-2001 SAE ARP 823 SAE ARP 823D-1997 SAE AS 1990-1990

被代替标准

SAE AMS 4143D-2001

适用范围

This specification covers an aluminum alloy in the form of die forgings, hand forgings, forged rings, rolled rings, and stock for forging or rings. These products have been used typically for structural, machined parts but usage is not limited to such applications. This material may be welded in the T6 condition but properties are improved by heat treatment after welding. Certain design and fabricating procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 823 recommends practices to minimize such conditions.