ASNI C63.012-1999
电磁兼容性限值用推荐实施规程

Recommended Practice for Electromagnetic Compatibility Limits

ASNI C63.012-1999 发布历史

Over the years many electromagnetic compatibility measurement and control standards have been developed. Many of these are of concern to particuclalar sses of devices such as receivers, transmitters, incidental radiation devices, etcI. n establishing limits,i t is necessary to relate the measurement technique that is used to determine compliance with a given limit to the field conditions under which the device being controlled will actually operate. This recommended practice presents a rationale for developing limits' and recommends sets of limits that are representativeo f current practice. These limits may be adjusted in particular applications as circumstances dictate. As part of the developmento f limits, the following parameters shobue lcdo nsidered: a) The general properties of both man-made and natural environmental electromagnetic noise (disturbances) 2 b) An understanding of the devices commonly used for measurement of such disturbances and their properties, which will assist the practitioner in selecting such equipments and associated measurement techniques for the particular application c) The rationale that can be used in selecting a consistent seot f limits for emission and immunity (susceptibility), subject to various environmental constraints (good engineering practice) These practices are intended to be applicable to individual equipments as well as systemosf various sizes and, if properly applied, will provide guidanfcoer obtaining both intrasystem and intersystem compatibility. This recommended practice is organized as follows: Clause 2 references instrumentation and measurement methods; Clause 3 contains a list of definitions; Clause 4 describes environmental radio noise; Clause 5 describes the selectiono f measurement parameters; Claus6e discusses limit setting; and Annexi s A a bibliography.

ASNI C63.012-1999由美国国家标准学会 US-ANSI 发布于 1999-12-14。

ASNI C63.012-1999 在中国标准分类中归属于: L06 电磁兼容。

ASNI C63.012-1999 发布之时，引用了标准

• ANSI C63.2-1996 10H至40GH电磁噪音和场强仪器规范
• ANSI C63.14-1998 电磁兼容性(EMC)、电磁脉冲(EMP)和静电放电(ESD)的技术词典
• CISPR 11-1990 Limites et méthodes de mesure des caractéristiques de perturbations électromagnétiques des appareils industriels@ scientifiques et médicaux (ISM) à fréquence radioélectrique (Edition 2.0)
• CISPR 13-1990 Limites et méthodes de mesure des caractéristiques de perturbation radioélectrique des récepteurs de radiodiffusion et de télévision et équipements associés (Edition 2.0)
• CISPR 22-1993 Limites et méthodes de mesure des caractéristiques de perturbations radioélectriques produites par les appareils de traitement de l'information (Edition 2.0; Corrigendum-1995; Amendment 1-1995; CENELEC EN 55022: 1994; AS/NZS 3548: 1995; Amendment 2-1996)
• IEC 61000-4-2-1995 电磁兼容性(EMC) 第4部分:试验和测量技术 第2节:静电放电抗扰度试验 基础EMC出版物
• IEC 61000-4-3-1995 电磁兼容性(EMC).第4部分:试验和测量技术.第3节:辐射,辐射频率和电磁场抗扰试验
• IEC 61000-4-4-1995 电磁兼容性(EMC) 第4部分:试验和测量技术 第4节:电快速瞬变/猝发抗扰度试验 基础EMC出版物
• IEC 61000-4-5-1995 电磁兼容性(EMC) 第4部分:试验和测量技术 第5节:浪涌抗扰度试验

ASNI C63.012-1999的历代版本如下：

• 1999年12月14日 ASNI C63.012-1999 电磁兼容性限值用推荐实施规程

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ASNI C63.012-1999 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

ASNI C63.012-1999

发布日期

1999年12月14日

实施日期

废止日期

无

中国标准分类号

L06

发布单位

US-ANSI

引用标准

ANSI C63.2-1996 ANSI C63.4-1992 ANSI C63.7-1992 ANSI C63.14-1998 CISPR 11-1990 CISPR 13-1990 CISPR 22-1993 FCC 47 CFR 15 B FCC 47 CFR 18 FCC 47 CFR 68 IEC 61000-4-2-1995 IEC 61000-4-3-1995 IEC 61000-4-4-1995 IEC 61000-4-5-1995 IEC 61000-4-6-1996 IEEE Std

被代替标准

ANSI C63.12-1987

适用范围

Over the years many electromagnetic compatibility measurement and control standards have been developed. Many of these are of concern to particuclalar sses of devices such as receivers, transmitters, incidental radiation devices, etcI. n establishing limits,i t is necessary to relate the measurement technique that is used to determine compliance with a given limit to the field conditions under which the device being controlled will actually operate. This recommended practice presents a rationale for developing limits' and recommends sets of limits that are representativeo f current practice. These limits may be adjusted in particular applications as circumstances dictate. As part of the developmento f limits, the following parameters shobue lcdo nsidered: a) The general properties of both man-made and natural environmental electromagnetic noise (disturbances) 2 b) An understanding of the devices commonly used for measurement of such disturbances and their properties, which will assist the practitioner in selecting such equipments and associated measurement techniques for the particular application c) The rationale that can be used in selecting a consistent seot f limits for emission and immunity (susceptibility), subject to various environmental constraints (good engineering practice) These practices are intended to be applicable to individual equipments as well as systemosf various sizes and, if properly applied, will provide guidanfcoer obtaining both intrasystem and intersystem compatibility. This recommended practice is organized as follows: Clause 2 references instrumentation and measurement methods; Clause 3 contains a list of definitions; Clause 4 describes environmental radio noise; Clause 5 describes the selectiono f measurement parameters; Claus6e discusses limit setting; and Annexi s A a bibliography.

ASNI C63.012-1999系列标准