BS EN 13016-2-2007
液化石油产品.蒸气压力.40℃和100℃之间的绝对蒸气压(AVP)的测定

Liquid petroleum products - Vapour pressure - Determination of absolute vapour pressure (AVP) between 40 °C and 100 °C

BS EN 13016-2-2007 发布历史

This European Standard specifies a method for the determination of absolute vapour pressure of liquid petroleum products at elevated temperatures. The conditions used in the test described in this standard are a vapour to liquid ratio of 3:2 and an initial injection temperature of 37,8 °C or 30,0 °C. The method described is suitable for testing air-saturated samples that exert an air-saturated vapour pressure of between 9 kPa and 500 kPa at temperatures between 40 °C and 100 °C. This European Standard is applicable to fuels containing oxygenated compounds up to the limits stated in the relevant EC Directive 85/536/EEC [3]. NOTE 1 If a sample injection is into a test chamber which is raised to 37,8 °C and the vapour to liquid ratio is 4:1, the initial measurement corresponds with the measurement in Part 1 of this standard. NOTE 2 For the purposes of this European Standard, the term “% (V/V)” is used to represent the volume fraction. WARNING — Use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

BS EN 13016-2-2007由英国标准学会 GB-BSI 发布于 2007-10-31，并于 2007-10-31 实施。

BS EN 13016-2-2007 在中国标准分类中归属于: E31 燃料油，在国际标准分类中归属于: 75.160.20 液体燃料。

BS EN 13016-2-2007 发布之时，引用了标准

• EN ISO 3170 石油液体.手工取样ISO 3170-2004;［使用:IP 475/2005］

BS EN 13016-2-2007的历代版本如下：

• 2007年10月31日 BS EN 13016-2-2007 液化石油产品.蒸气压力.40℃和100℃之间的绝对蒸气压(AVP)的测定

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 BS EN 13016-2-2007 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

BS EN 13016-2-2007

发布日期

2007年10月31日

实施日期

2007年10月31日

废止日期

无

中国标准分类号

E31

国际标准分类号

75.160.20

发布单位

GB-BSI

引用标准

EN ISO 3170

被代替标准

05/30143114 DC-2005 BS EN 13016-2-2000

适用范围

This European Standard specifies a method for the determination of absolute vapour pressure of liquid petroleum products at elevated temperatures. The conditions used in the test described in this standard are a vapour to liquid ratio of 3:2 and an initial injection temperature of 37,8 °C or 30,0 °C. The method described is suitable for testing air-saturated samples that exert an air-saturated vapour pressure of between 9 kPa and 500 kPa at temperatures between 40 °C and 100 °C. This European Standard is applicable to fuels containing oxygenated compounds up to the limits stated in the relevant EC Directive 85/536/EEC [3]. NOTE 1 If a sample injection is into a test chamber which is raised to 37,8 °C and the vapour to liquid ratio is 4:1, the initial measurement corresponds with the measurement in Part 1 of this standard. NOTE 2 For the purposes of this European Standard, the term “% (V/V)” is used to represent the volume fraction. WARNING — Use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

BS EN 13016-2-2007系列标准